Browning® 767707 VS 200 Standard-Duty Straight Bore Ball Bearing Insert, 2 in Dia Bore, 3.937 in OD, 2-3/16 in W, 9752 lb Dynamic/6601 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
-
BrandBrowning®
-
UPC662289526451
-
Manufacturer Part Number767707
-
CountryUSA
-
Load Capacity9752 lb Dynamic/6601 lb Static
-
Cage MaterialPlastic
-
Temperature Rating-20 to 200 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed2500 rpm
-
Closure TypeDouble Seal
-
TypeStandard-Duty Straight Bore
-
Seal MaterialNitrile Rubber
-
Width2-3/16 in
-
SeriesVS 200
-
Bearing MaterialSteel
-
Outside Diameter3.937 in
-
Bore Diameter2 in
- Browning bearing insert with lubrication hole and anti-rotation rivet
- Zone hardened inner ring with 120 deg spacing setscrew lock with diamond faceted setscrews
- Single lip contact seal and flinger
- Lithium complex NLGI #2 grease with an EP additive
- Spherical outer diameter
- Without Snap Ring
- Browning bearing insert with lubrication hole and anti-rotation rivet_x005f Zone hardened inner ring with 120 deg spacing setscrew lock with diamond faceted setscrews_x005f Single lip contact seal and flinger
-
Alternative Part NumberVS-232
-
UNSPSC31171537
-
Package DescriptionEACH
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Browning® 767707 VS 200 Standard-Duty Straight Bore Ball Bearing Insert, 2 in Dia Bore, 3.937 in OD, 2-3/16 in W, 9752 lb Dynamic/6601 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Handi-Paks booklets fit in a pocket for easy transport and access.
ISOSTATIC™ Oilube® 401186 Round Bore Sleeve Bearing, 5/8 in Dia Bore, 3/4 in OD, 1-1/4 in W
MARXMAN™ 85058 330QI General Purpose Jobber Length Drill Bit, #4 Drill - Wire, 0.209 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
1" X 2" RED HD RECT DIE SPRINGS-LANSHDR1000200 >
3/8" DIAMETERX1- 3/4" SOCKET HEAD CAP SCREWS-HOL72164 >
