Browning 1-5/8"-ID SPH/OD INSERT BEARINGS BRW VS-226
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
-
BrandBrowning®
-
UPC662289526390
-
Manufacturer Part Number767406
-
CountryUSA
-
Load Capacity7901 lb Dynamic/5139 lb Static
-
Cage MaterialPlastic
-
Temperature Rating-20 to 200 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed3000 rpm
-
Closure TypeDouble Seal
-
TypeStandard-Duty Straight Bore
-
Seal MaterialNitrile Rubber
-
Width1-15/16 in
-
SeriesVS 200
-
Bearing MaterialSteel
-
Outside Diameter3.3465 in
-
Bore Diameter1-5/8 in
- Single setscrew locking is 120 deg spaced, balanced three point contact minimizes inner ring distortion vibration, reduces noise and improves reliability
- Positive contact molded nitrile rubber single lip contact seal with an auxiliary flinger element standard
- An anti-rotation rivet prevents outer ring creep or rotation within the housing
- Zone hardened inner race
- Lithium complex NLGI #2 grease with an EP additive
- Spherical outer diameter
- Without Snap Ring
-
Alternative Part NumberVS-226
-
UNSPSC31171537
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
1/4" X 2-1/2" USS SOCKET HEAD SET SCREWS-NBS7190250250 >
5.81" DX60.75" L FILTER BAG 16G-NFM0506357 >
Irwin® Vise-Grip® 31 9SP® Fixed Tip Standard Locking C-Clamp, Nickel Plated, 4-3/4 in D Throat, 4-1/2 in Jaw Opening, 9 in L Jaw, Heat Treated Alloy Steel
The IRWIN Original 9SP 9-inch Locking C-Clamp has wide-opening jaws to provide greater versatility in clamping a variety of shapes and is constructed of high-grade, heat-treated alloy steel for maximum toughness and durability. Its classic trigger release is designed to provide maximum locking force. Turn the screw on the IRWIN clamp to adjust pressure and fit work. The locking clamp stays adjusted for repetitive use.
SPRAYER HEADS FOR 22-OZ BOTTLES-CON922H >
