Browning® 767206 SLS 100 Light Duty Straight Bore Ball Bearing Insert, 1-3/8 in Dia Bore, 2.835 in OD, 1.281 in W, 5782 lb Dynamic/3493 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
-
BrandBrowning®
-
UPC662460344003
-
Manufacturer Part Number767206
-
CountryUSA
-
Load Capacity5782 lb Dynamic/3493 lb Static
-
Cage MaterialPlastic
-
Temperature Rating-20 to 200 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed2500 rpm
-
TypeLight Duty Straight Bore
-
Width1.281 in
-
SeriesSLS 100
-
Bearing MaterialSteel
-
Outside Diameter2.835 in
-
Bore Diameter1-3/8 in
- Cylindrical O.D. narrow inner ring bearing insert with no lubrication
- Zone hardened inner ring with 120 deg spacing setscrew lock with diamond faceted setscrews
- Single lip contact seal
-
Alternative Part NumberSLS-122
-
UNSPSC31171504
-
Package DescriptionEACH
-
Warranty1 Year
-
Instruction/Installation Manual
-
Specification Sheet
-
Catalog
-
Warranty Information
Recently Viewed
Browning® 767206 SLS 100 Light Duty Straight Bore Ball Bearing Insert, 1-3/8 in Dia Bore, 2.835 in OD, 1.281 in W, 5782 lb Dynamic/3493 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Shaft support blocks are used for end or intermittent support where loads are light and deflection between supports is not a problem. Unlike shaft support rails, blocks do not permit longitudinal passage of open-type Ball Bushing® bearings. Type SB shaft support blocks enable clamping of shafts and eliminate the need for bolts, to maintain shaft position. Shimming is suggested for high-precision applications to eliminate the effect of variations in surface of base or manufacturing tolerances between supports.
1-3/8" -ID H BUSHING WITH 5/16" -KEYWAY
RT1 Series Foam Lined Safety Glasses Adjustable Ratcheting Temples Interchangeable Head Band Included Dielectric with No Metal Pieces The RT1 series features interchangeable 3-position ratcheting bayonet temples and an adjustable elastic headband with each pair. A unique feature of the headband with hook and loop closure is the ability to adjust with one hand while wearing. The RT1 also features full-length, non-slip TPR temple sleeves for comfort and grip. A closed cell foam seal provides optimum protection from small particles and debris. The lightweight nylon frame and polycarbonate wrap-around lens design provides greater side impact protection. This foam-lined sealed eyewear could be used as motorcycle safety glasses! If you are looking for the best safety glasses, choose MCR Safety! This product meets the ANSI/ISEA Z87.1-2025 standard.
Dow Corning® 1892118 732 1-Component Multi-Purpose Sealant, 10 oz Cartridge, White, Silicone Base
MECHANICAL PUMP SEALS-USSPS358 >
