MCR Safety RT122AF Rattler™ Dielectric Indirect Vented Scratch Resistant Protective Goggles, Anti-Fog Gray Polycarbonate Lens, Yes % UV Protection, Elastic Strap, ANSI Z87+
RT1 Series Foam Lined Safety Glasses Adjustable Ratcheting Temples Interchangeable Head Band Included Dielectric with No Metal Pieces The RT1 series features interchangeable 3-position ratcheting bayonet temples and an adjustable elastic headband with each pair. A unique feature of the headband with hook and loop closure is the ability to adjust with one hand while wearing. The RT1 also features full-length, non-slip TPR temple sleeves for comfort and grip. A closed cell foam seal provides optimum protection from small particles and debris. The lightweight nylon frame and polycarbonate wrap-around lens design provides greater side impact protection. This foam-lined sealed eyewear could be used as motorcycle safety glasses! If you are looking for the best safety glasses, choose MCR Safety! This product meets the ANSI/ISEA Z87.1-2025 standard.
-
BrandMCR Safety
-
UPC766868874237
-
Manufacturer Part NumberRT122AF
-
CountryUSA
-
Temple StyleBayonet
-
Frame ColorSilver
-
Frame MaterialNylon
-
Frame TypeWrap Around
-
GenderUnisex
-
TypeDielectric Indirect Vented Scratch Resistant
-
UV ProtectionYes %
-
SeriesRattler™
-
SizeUniversal
-
Specifications MetANSI Z87+
-
Strap MaterialElastic
-
Lens CoatingAnti-Fog
-
Lens ColorGray
-
Lens MaterialPolycarbonate
- Closed cell foam seal provides optimum protection from small particles and debris
- Interchangeable 3-position ratcheting bayonet temples and an adjustable head band with each pair
- Available in magnifier options
- Lightweight nylon frame
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 1037978 |
| Grainger | 6LGZ1 |
| MSC | 52407962 |
-
UNSPSC46181804
-
Package Description1/PR
-
Standards/ApprovalsANSI Z87+
-
Specification Sheet
Recently Viewed
MCR Safety RT122AF Rattler™ Dielectric Indirect Vented Scratch Resistant Protective Goggles, Anti-Fog Gray Polycarbonate Lens, Yes % UV Protection, Elastic Strap, ANSI Z87+
RT1 Series Foam Lined Safety Glasses Adjustable Ratcheting Temples Interchangeable Head Band Included Dielectric with No Metal Pieces The RT1 series features interchangeable 3-position ratcheting bayonet temples and an adjustable elastic headband with each pair. A unique feature of the headband with hook and loop closure is the ability to adjust with one hand while wearing. The RT1 also features full-length, non-slip TPR temple sleeves for comfort and grip. A closed cell foam seal provides optimum protection from small particles and debris. The lightweight nylon frame and polycarbonate wrap-around lens design provides greater side impact protection. This foam-lined sealed eyewear could be used as motorcycle safety glasses! If you are looking for the best safety glasses, choose MCR Safety! This product meets the ANSI/ISEA Z87.1-2025 standard.
Koyo TRC-2233 Double Direction Thrust Washer, 34.93 mm ID x 52.37 mm OD, 2.41 mm W
Ideally, a thrust washer should be stationary with respect to and piloted by its supporting or backing member whether or not this is an integral part of the shaft or housing. There should be no rubbing action between the thrust washer and any other machine member. The economics of design, however, often preclude these ideal conditions and thrust washers must be employed in another manner. In such cases, design details should be determined in consultation with your representative.
Drillco 700A008 Jobber Length Drill Bit, #8 Drill - Wire, 0.0807 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Uncoated
700 series solid carbide drills retain hardness and sharp edges at high temperature. Their abrasion-resistant qualities make them advantageous for drilling abrasive materials. They offer the advantage of extreme rigidity for greater drilling accuracy.
2-7/16" 2-B SPLIT HOUSING PILLOW BLOCK-ROY60020207 >
SLIP SHOT II RED GREASE-MIS72716 >
Proto® J6012C C Series Micrometer Torque Wrench, 3/8 in Drive, 20 to 100 ft-lb, Ratcheting Head, 0.5 ft-lb Graduation, 17 in OAL, ASME B107.14M
