Browning 1-1/4"-ID SPH/OD INSERT BEARINGS BRW VS-220-S
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
-
BrandBrowning®
-
UPC662289526314
-
Manufacturer Part Number767551
-
CountryUSA
-
Load Capacity4381 lb Dynamic/2567 lb Static
-
Cage MaterialPlastic
-
Temperature Rating-20 to 200 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed4500 rpm
-
Closure TypeDouble Seal
-
TypeStandard-Duty Straight Bore
-
Seal MaterialNitrile Rubber
-
Width1-1/2 in
-
SeriesVS 200
-
Bearing MaterialSteel
-
Outside Diameter2.4409 in
-
Bore Diameter1-1/4 in
- Single setscrew locking is 120 deg spaced, balanced three point contact minimizes inner ring distortion vibration, reduces noise and improves reliability
- Positive contact molded nitrile rubber single lip contact seal with an auxiliary flinger element standard
- An anti-rotation rivet prevents outer ring creep or rotation within the housing
- Lithium complex NLGI #2 grease with an EP additive
- Spherical outer diameter
- Without Snap Ring
- Browning bearing insert with lubrication hole and anti-rotation rivet_x005f Zone hardened inner ring with 120 deg spacing setscrew lock with diamond faceted setscrews_x005f Single lip contact seal and flinger
-
Alternative Part NumberVS-220S
-
UNSPSC31171537
-
Package DescriptionEACH
-
Instruction/Installation Manual
-
Specification Sheet
-
Catalog
Recently Viewed
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
MORSE® 59066 5989 Regular Length Single End Drill Mill, 5/16 in Dia, 90 deg Point, 2 Flutes, 13/16 in L Flute, 13/16 in L of Cut, 5/16 in Dia Shank, 2-1/2 in OAL, Bright
FYH® NA210 31 NA Series Cylindrical Insert Bearing, 1-15/16 in Dia Bore, 2.46 in W, 35.1 kN Dynamic/23.3 kN Static Load
FYH® NA210 31 NA Series Cylindrical Insert Bearing, 1-15/16 in Dia Bore, 2.46 in W, 35.1 kN Dynamic/23.3 kN Static Load
NIBCO 1854-030 Loose Ring Flange, 3 in, CPVC, Socket, 150 lb, Domestic
Loose Ring Flange, 3 in, CPVC, Socket, 150 lb, Domestic
2-3/16" -ID 2-BOLT PILLOW BLOCK-BRWSPB1000EX23/16 >
