FYH® SAA206 19FP7 SAA Cylindrical Ball Bearing Insert, 1-1/8 in Dia Bore, 2.44 in OD, 1.4 in W, 19.5 kN Dynamic/11.3 kN Static Load
FYH® SAA206 19FP7 SAA Cylindrical Ball Bearing Insert, 1-1/8 in Dia Bore, 2.44 in OD, 1.4 in W, 19.5 kN Dynamic/11.3 kN Static Load
-
BrandFYH®
-
Manufacturer Part NumberSAA206 19FP7
-
CountryUSA
-
Load Capacity19.5 kN Dynamic/11.3 kN Static
-
Closure TypeEccentric Locking Collar
-
TypeCylindrical
-
Width1.4 in
-
SeriesSAA
-
Outside Diameter2.44 in
-
Bore Diameter1-1/8 in
Recently Viewed
FYH® SAA206 19FP7 SAA Cylindrical Ball Bearing Insert, 1-1/8 in Dia Bore, 2.44 in OD, 1.4 in W, 19.5 kN Dynamic/11.3 kN Static Load
FYH® SAA206 19FP7 SAA Cylindrical Ball Bearing Insert, 1-1/8 in Dia Bore, 2.44 in OD, 1.4 in W, 19.5 kN Dynamic/11.3 kN Static Load
7" GREEN MET/DET CABLE TIE--PK/100-CTE750DTNGN100>
Browning® 767956 VE Series Light Duty Straight Bore Ball Bearing Insert, 5/8 in Dia Bore, 1.575 in OD, 1.188 in W, 2108 lb Dynamic/1117 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Crosby® 1031378 HG-226 Turnbuckle, Eye/Eye, 5/8 in Thread, 3500 lb Working, 6 in Take Up, 16.72 in L Close, Steel
Crosby® 1031378 HG-226 Turnbuckle, Eye/Eye, 5/8 in Thread, 3500 lb Working, 6 in Take Up, 16.72 in L Close, Steel
Crosby® 1031476 HG-226 Turnbuckle, Eye/Eye, 3/4 in Thread, 5200 lb Working, 12 in Take Up, 24.9 in L Close, Steel
Crosby® 1031476 HG-226 Turnbuckle, Eye/Eye, 3/4 in Thread, 5200 lb Working, 12 in Take Up, 24.9 in L Close, Steel
Dichtomatik N70013 O-Ring, 013 Dash Number, 0.426 in ID x 0.566 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
