Little Giant® 510852 10EC Effluent Pump, 67 gpm Max Flow, 5 ft Rated Head, Automatic, 36 ft Max Head, 115 V, 1 ph
-
BrandLittleGIANT®
-
UPC010121149236
-
Manufacturer Part Number510852
-
CountryUSA|Canada
-
Temperature Rating140 deg F
-
Maximum Flow Rate67 gpm
-
Maximum Head36 ft
-
Maximum Pressure15.6 psi
-
Maximum Suction Lift30 ft
-
Rated Head5 ft
-
Frequency Rating60 Hz
-
Voltage Rating115 V
-
Cord TypeSJTW 20 ft
-
Amperage Rating6.5 A
-
Series10EC
-
Automatic/Non AutomaticAutomatic
-
Horsepower1/2 hp
-
Impeller TypeNylon
-
Dimensions8.79 in L x 8.48 in W x 10.9 in H
-
Bearing TypeUpper and Lower Ball
-
Domestic/ImportImport
-
Outlet Size1-1/2 in FNPT
-
Phase1
- Heavy duty cast iron construction
- Designed for continuous duty
- Energy saving low amp draw
- Cast iron base
- Piggyback mechanical float operation
- Handles solids up to 1/2 in Dia
-
Alternative Part Number10EC-CIA-RF
-
UNSPSC40151500
-
Package Description1/PK
-
Standards/ApprovalscCSAus Certified
-
Warranty3 Years
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Weiler® 08209 Wheel Brush, 12 in Dia Brush, 3/4 in W Face, 0.014 in Dia Filament/Wire Standard/Twist Knot Filament/Wire, 1-1/4 in Arbor Hole
Weiler® 12 in standard twist knot wire Wheel Brush provides a heavy duty brushing action with some flexibility for demanding deburring cleaning and surface preparation applications on somewhat irregular surfaces. Featuring Weiler® individual knot hole construction, these radial brushes are available in heat treated steel, type 302 stainless steel and bronze wire for use in a wide variety of applications. 1-1/4 in arbor hole for use on bench/pedestal grinder, die grinder, right angle die grinder and straight grinders.
THIS BRUSH HAS A DURABLE BEECHWOOD HANDLE WITH RUST RESISTANT STEEL FERRULE. 100% SOLID ROUND TAPERED FILAMENT. SMOOTH PAINT PICKUP AND TRANSFER. FILAMENT BLEND AND TREATED WOODEN PLUGS ALLOW THIS PAINT BRUSH TO PICK UP AND RELEASE MORE PAINT WITH EVERY DIP.
-JWH782579 >
FYH® SAA206 19FP7 SAA Cylindrical Ball Bearing Insert, 1-1/8 in Dia Bore, 2.44 in OD, 1.4 in W, 19.5 kN Dynamic/11.3 kN Static Load
FYH® SAA206 19FP7 SAA Cylindrical Ball Bearing Insert, 1-1/8 in Dia Bore, 2.44 in OD, 1.4 in W, 19.5 kN Dynamic/11.3 kN Static Load
1" X 4-1/2" MD/HD OVAL DIE SPRINGS-LANSMHO1000450 >
Browning® 1045343 VP Series Type 1 Variable Pitch Sheave, 1/2 in Finished Bore, 4.15 in OD, 1 Groove, 2.7 to 3.5 in (3L)/3 to 4 in (A/4L)/3.2 to 4.2 in (B/5L) Dia Pitch, 21/32 to 1-1/32 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.

