Loctite® 30511 Fast Dry Rigid Cure Gasket Sealant, 3 oz Tube
Loctite® 30511 Fast Dry Rigid Cure Gasket Sealant, 3 oz Tube
-
BrandLoctite®
-
UPC079340305113
-
Manufacturer Part Number30511
-
CountryUSA
-
Temperature Rating-65 to 400 deg F
-
ColorReddish Brown
-
TypeFast Dry Rigid Cure
-
VOC Content0.0051
-
Container Size3 oz
-
Adheres toMetal and Plastic
-
Container TypeTube
-
Curing Time24 hr at 77 deg F
-
Work Life2 hr
-
Specific Gravity1.6
- Gasket sealant 1 for extended gasket life, fast drying, rigid cure
- Sets quickly to a hard set and is recommended for rigid, permanent assemblies
- Use to 400 deg F resistant to gasoline and other solvent
-
UNSPSC31201700
-
Package Description12/CS
-
Standards/ApprovalsCFIA Approved
-
Catalog
Recently Viewed
Loctite® 30511 Fast Dry Rigid Cure Gasket Sealant, 3 oz Tube
Loctite® 135504 587™ High Performance Low Odor Non-Corrosive Low Volatility Gasket Maker, 70 mL Tube
Loctite® 135504 587™ High Performance Low Odor Non-Corrosive Low Volatility Gasket Maker, 70 mL Tube
Loctite® 234609 598™ High Performance Low Odor Non-Corrosive Gasket Maker, 70 mL Tube
Loctite® 234609 598™ High Performance Low Odor Non-Corrosive Gasket Maker, 70 mL Tube
Top Pick LOCTITE® Hi-Tack Gasket Sealant prevents seizing, correct gasket alignment, easy disassembly. Red-colored, liquid sealant that holds gaskets in place during assembly. Seals and bonds rubber, cork, paper, felt, metal, and asbestos gaskets. Sets quickly to a very tacky movie. Suitable for 500 deg F (260 deg C). Contains no ozone-depleting compounds. Applications include weather stripping, waterproofing electrical connections.
Loctite® 2096064 Anaerobic Medium Strength Eliminator Gasket Sealant, 50 mL Container Tube Container
LOCTITE® 518™ is a medium-strength, general purpose gasketing product with excellent contamination tolerance. Ideal for use on casted iron, steel and aluminum flanges. LOCTITE® 518™ cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use on rigid iron, aluminum, and steel flanged mating surfaces. LOCTITE® 518™ fills gaps up to 0.25 mm and forms a flexible, chemical-resistant seal that will not tear or decay. Parts disassemble easily, even after extended service. Typical applications include sealing close-fitting joints between rigid metal faces and flanges. It is also used as a formed-in-place gasket on rigid flanged connections, e.g. transmissions and motor housings.
LOCTITE® 574 seals close-fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close-fitting metal surfaces. It provides resistance to low pressures immediately after assembly. Typically used as a form-in-place gasket on rigid flanged connections. The nature of LOCTITE 574 reduces the migration of liquid product after application to the substrate. It has a high oil tolerance and excellent water and glycol resistance.
