Jet Tools 3-TON 20'-LIFT JLP-300-20 PULLERS JET 187718
JET® JLP-A Series Lever Hoists combine safety, reliability, and durability that are designed to perform in light to medium-duty industrial applications. The patented Brake Wear Indicator increases safety by letting you know when to replace the friction disks. JET® also offers the option of shipyard hooks, virtually eliminating stretched hooks caused by point or tip loading. The JET® JLP-A Lever Hoist is available in ¼ ton to 6 ton capacities with standard lifts of 5, 10, 15, and 20 feet (custom lifts available). The JET® JLP-A Series is the perfect choice for a contractor grade Lever Hoist.
-
BrandJET®
-
UPC731325473292
-
Manufacturer Part NumberJT9-287803
-
CountryUSA
-
Load Capacity3 ton
-
Chain MaterialGrade 80 Alloy
-
Pull to Lift Rated Load71 lb
-
Minimum Between Hooks18.89 in
-
TypeContractor Grade
-
SeriesJLP-A
-
Hook Opening2.46 in
-
Brake TypeDual Pawl Weston
-
Lever Length16-1/7 in
-
Lifting Height20 ft
- Weston style dual pawl brake system double pawl design increases safety
- Alloy steel hooks industrial rated hooks rotate 360 degrees for easy rigging, hooks slowly stretch to indicate an overload situation increasing jobsite safety
- Safety, reliability and durability
- Needle bearing design promotes long hoist life with low wear reducing downtime
- Grade 80 load chain grade 80 black oxide coated load chain for durability
- All steel construction with impact resistant covers that provide durability and protection
- Compact design- smaller body and lightweight design for low headroom applications and use in confined areas
- 1 falls
- 2/3 in lift per turn
- 18-8/9 in headroom
- JET® also offers the option of shipyard hooks, virtually eliminating stretched hooks caused by point or tip loading
- Overload protection prevents the lever hoist from lifting or pulling damaging loads above its rated capacity
- 7.88 in overall width
- Certification load tested to 125% of capacity with certificate
- 10 x 30 mm load chain
- Shipyard hooks- blunt tip, point loading hooks virtually eliminate stretched hooks, reducing downtime for maintenance and repair
- No overload protection
-
Alternative Part Number287803
-
UNSPSC31162604
-
Standards/ApprovalsANSI/ASME B30.21 and HST-3 Standards|OSHA regulations
-
Owners/User Manual
Recently Viewed
JET® JLP-A Series Lever Hoists combine safety, reliability, and durability that are designed to perform in light to medium-duty industrial applications. The patented Brake Wear Indicator increases safety by letting you know when to replace the friction disks. JET® also offers the option of shipyard hooks, virtually eliminating stretched hooks caused by point or tip loading. The JET® JLP-A Lever Hoist is available in ¼ ton to 6 ton capacities with standard lifts of 5, 10, 15, and 20 feet (custom lifts available). The JET® JLP-A Series is the perfect choice for a contractor grade Lever Hoist.
HCI Preferred Supplier 300004 Breather Vent, 1/2 in, 40 micron Filter, Brass Body/Sintered Bronze Element
HCI Preferred Supplier 300004 Breather Vent, 1/2 in, 40 micron Filter, Brass Body/Sintered Bronze Element
1" X 1" X 36" 14-GA FENCE--RL/100'-JWH717950R>
The Screw-Bolt+™ anchor is a one-piece, heavy duty Screw Anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
2-B-521610 Dodge® 118220 Type A1 Sheave, 1/2 to 1-11/16 in Taper-Lock® Bore, 5.55 in OD, 2 Grooves, 5.18/5.56 in Dia Pitch, 1-3/4 in W Face
Sheaves are manufactured in Dodge® plants under strict quality control assurances. Precision machining meets or exceeds joint extended belt life. Dodge® manufactures all sheaves in plants certified to ISO 9002 quality standards.
HCI Preferred Supplier 2404812 Straight Connector, 3/4 in x 3/4-16 Nominal, 37 deg SAE Male JIC Flare x MNPT, Steel
HCI Preferred Supplier 2404812 Straight Connector, 3/4 in x 3/4-16 Nominal, 37 deg SAE Male JIC Flare x MNPT, Steel
