Permatex® 51531 Anaerobic Flange Sealant, 50 mL Container Tube Container
Permatex® anaerobic flange sealant is a single component, medium strength, thixotropic, anaerobic sealant that cures rapidly. The product cures when confined in the absence of air between close fitting metal flanges. It provides a tough, resilient, solvent and temperature resistant seal that flexes with flange movement caused by vibration, pressurization or thermal changes.
-
BrandPermatex®
-
UPC686226515315
-
Manufacturer Part Number51531
-
CountryUSA|Canada
-
Temperature Rating-65 to 300 deg F
-
Chemical TypeMethacrylate
-
ColorPurple
-
TypeAnaerobic Multi-Purpose
-
VOC Content<3%
-
Container Size50 mL
-
Adheres toAluminum, Brass, Iron and Steel
-
Container TypeTube
-
Curing Time1 to 12 hr
-
Specific Gravity1.1
-
Drying Time1 min
- Seals all surface imperfections
- Seals most common automotive fluids
- No cracking or shrinking during cure
- Eliminates costly retorquing operations
- Single component system
- Non-corrosive to metal parts
- Flexible, gasketing material for use on rigid machined flanges with less than 0.015 in gap
- OEM approved use where OEs specify anaerobic gasket (cures in the absence of air)
- Withstands temperatures to 300 deg F (149 deg C)
- Eliminates preformed, pre-cut, paper, rubber and cork gaskets
- Flexes with flanges that move in service
- Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube, coolants, gasoline
- High reliability sealing
-
UNSPSC31201700
-
Package Description10/CS
-
Standards/ApprovalsOEM Specified|OSHA 29 CFR 1910.1200
-
SDS
-
Catalog
-
Specification Sheet
Recently Viewed
Permatex® anaerobic flange sealant is a single component, medium strength, thixotropic, anaerobic sealant that cures rapidly. The product cures when confined in the absence of air between close fitting metal flanges. It provides a tough, resilient, solvent and temperature resistant seal that flexes with flange movement caused by vibration, pressurization or thermal changes.
True Temper® 1640700 Snow Shovel, 18 in W, Steel Blade
1/2" X 1/2" FEMALE FLARE CONNECTOR-JWH445517>
3/4" x 1/2" Threaded Flush Reducer Bushing made from high-strength Schedule 80 PVC. It is used to connect a larger 3/4" male pipe thread down to a smaller 1/2" female pipe thread in high-pressure water systems.
Morse® Matrix II ZWEDR18MAT Welded Band Saw Blade, 1/2 in W x 0.025 in THK, 18 TPI, Bi-Metal Blade, HSS Tooth
Lasco® Fittings, Inc's comprehensive line of PVC injection molded fittings offers a variety of configurations in sizes 3/8 in through 12 in. SCH 80/XH fittings are manufactured to ASTM D 2467.
