NIBCO 3/4"-MPT X 1/2"-FPT 80 PVC BUSHING NIB 839-101
3/4" x 1/2" Threaded Flush Reducer Bushing made from high-strength Schedule 80 PVC. It is used to connect a larger 3/4" male pipe thread down to a smaller 1/2" female pipe thread in high-pressure water systems.
-
BrandLasco®
-
UPC025528721411
-
Manufacturer Part Number839-101
-
CountryUSA
-
MaterialPVC
-
Fitting/Connector TypeBushing
-
Method of ManufactureInjection-Molded
-
ColorGray
-
TypeFlush
-
Schedule RatingSCH 80/XH
-
Nominal Size3/4 x 1/2 in
-
Domestic/ImportDomestic
-
End StyleMNPT x FNPT
- ASTM D-1784: Rigid poly vinyl chloride (PVC) compounds and chlorinated poly vinyl chloride (CPVC) compounds
- ASTM D-2464: Threaded poly vinyl chloride (PVC) plastic pipe fittings SCH 80/XH
- NSF/ANSI standard 61, Annex G: Drinking water system components weighted average lead content of less than or equal to 0.25% and is in compliance with California's health and safety code section 116875 (commonly known as AB1953) NSF/ANSI Standard 14: Plastics piping system components and related materials, includes ANSI standard 61, Annex G
- Do not use Lasco® fittings for compressed air or gases
- Do not test PVC piping systems with compressed air or gases
- Do not use fittings with liquids not recommended by Lasco®
- Fitting modification voids the warranty
-
UNSPSC40172308
-
Package Description25/CT
-
Standards/ApprovalsASTM D1784|ASTM D2464|NSF/ANSI 14|NSF/ANSI 61|Annex-G
-
Specification Sheet
-
Catalog
Recently Viewed
3/4" x 1/2" Threaded Flush Reducer Bushing made from high-strength Schedule 80 PVC. It is used to connect a larger 3/4" male pipe thread down to a smaller 1/2" female pipe thread in high-pressure water systems.
Morse® Matrix II ZWEDR18MAT Welded Band Saw Blade, 1/2 in W x 0.025 in THK, 18 TPI, Bi-Metal Blade, HSS Tooth
Lasco® Fittings, Inc's comprehensive line of PVC injection molded fittings offers a variety of configurations in sizes 3/8 in through 12 in. SCH 80/XH fittings are manufactured to ASTM D 2467.
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
Anvil® 0310027404 FIG 1104 Street Elbow, 3/4 in Nominal, MNPT x FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Justrite® 27608 Dip Tank, 8 gal Capacity, 15-5/8 in Dia x 14-1/4 in H, Galvanized Steel, Red
Use for cleaning parts and subassemblies where the volume of work does not warrant a larger rinse tank. Portable size accommodates changing production requirements. Dip tank covers stay open for convenient access; self-closing mechanism and fusible link melts at 165°F (74ºC) to snap the cover shut in case of fire. Dip tank with polyethylene liner offers outstanding chemical resistance to permit use with the harsh, corrosive chemicals. For effective cleaning of parts and subassemblies ensuring chemical resistance and safety in industries like chemical, manufacturing, and automotive.
