NICHOLSON 05059-N Half Round File, 10 in L, Double/Smooth Cut
The Crescent Nicholson half-round double-cut bastard files are ideal for materials containing iron, mild steel, plastics, and wood. The coarse grade is perfect for use on concave, convex, and flat surfaces. The two-sided files are rounded on 1 side and flat on the other, so you can round out holes with ease. Half-round bastard files are double-cut on the rounded sides, allowing you to quickly remove material from the work piece.
-
BrandCrescent®
-
UPC037103218827
-
Manufacturer Part Number05059N
-
CountryUSA|Canada
-
Thickness9/32 in
-
Coarseness of CutAmerican Pattern
-
TypeHalf Round
-
Handle TypeTang
-
Width7/8 in
-
Cut TypeDouble/Smooth
-
Length10 in
- American pattern files available in bastard, second, and smooth cut in a variety of the most common lengths
- Two-sided file is rounded on 1 side and flat on the other, so you can round out holes with ease
- Rounded sides of pipeliner files are single-cut, allowing you to quickly remove material from the work piece
- Pipeliner file is single-cut on both sides
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 6C965 |
| MSC | 80759335 |
-
UNSPSC27111921
-
Package DescriptionEACH
-
Owners/User Manual
-
Catalog
Recently Viewed
The Crescent Nicholson half-round double-cut bastard files are ideal for materials containing iron, mild steel, plastics, and wood. The coarse grade is perfect for use on concave, convex, and flat surfaces. The two-sided files are rounded on 1 side and flat on the other, so you can round out holes with ease. Half-round bastard files are double-cut on the rounded sides, allowing you to quickly remove material from the work piece.
Gates® Power Transmission PowerGrip® 800H100 Heavy Timing Belt, 1 in W, 80 in OAL, 1/2 in Pitch, 160 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
REPLACEMENT FILM CUTTERS--Pkg/3
Leviton® 80503-I Midway Size Traditional Wall Plate, 1 Gangs, 3-1/8 in W x 4-7/8 in H, Thermoset, Ivory
Familiar and functional, Leviton® traditional wallplates are designed for use with traditional Leviton® devices. They represent styles and form factors that have stood the test of time. Their clean lines work in virtually any location, whether in new or retrofit construction and they install quickly and easily. Leviton® offers traditional wallplates in a vast array of colors and configurations.
