LEVITON 15-AMP 120-VOLT ELECTRICAL PLUGS LEV 14-W-47
Woodhead® Watertite® wet location wiring devices are rated for high pressure hose down application up to 1000 psi, the benchmark for the industry. The only devices made of NEo-TEX® paracril OZO rubber, yields ultimate performance within a wide temperature range, around many oils, chemicals and abrasive conditions. Additional features include - unique multiple ring seals that lock snugly protecting against moisture and contaminants, sturdy compression-type cord grips that provide high pull-out strength and a protective closure cap that seals the connector when it is not in use. Woodhead® Watertite® products are time tested devices that professionals demand.
-
BrandWoodhead®
-
UPC786788710026
-
Manufacturer Part Number14W47
-
CountryUSA|Canada
-
Temperature Rating-40 to 75 deg C
-
Terminal TypeScrew/Wire
-
MaterialSilicone
-
ColorYellow
-
Type1-Phase Cable Mount Grounding Watertight
-
GradeIndustrial
-
NEMA RatingNEMA 5-15
-
Voltage Rating125 V AC
-
Cord Diameter0.375 to 0.655 in
-
Amperage Rating15 A
-
Number of Poles2
-
Dimensions1.5 in Dia x 2.71 in L
-
Number of Wires3
-
EnclosureIP67/IP69K
-
Series130146
- Multiple seal plug/connector interface keeps out contaminants, resists vapor and water from high pressure washdown up to 1000 psi
- Color coded 1/4 in terminal screws pre-set in open position ready to wire
- Wire screw terminals are tri-drive to be used with straight blade, Phillips® and square drive screwdrivers
- Floating blade construction provides self-alignment and a better mechanical and electrical connection minimizing wear and heat generation
- Transparent wiring guide to verify all wire strands are in place before securing wire
- Captive, tri-drive head, stainless steel, speed screw provides easy assembly and long life
- 3-piece strain relief seals cord without damaging the cord
- F2 body 1/2 in cable grip
- Nickel plated brass plug blades and connector contacts
- NEoTEX® paracril OZO rubber outer housing and grommet
- Stainless steel face screws
- Nylon face insert
- Brass wire saddle clamp
- Lexan® receptacle cover plate and closure caps
- Maximum 30 deg C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of 75% temperature rise
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 4UFC5 |
-
Alternative Part Number1301460031|8842180
-
UNSPSC39121402
-
IDEA Index ID8842180
-
Package DescriptionPIECE
-
Standards/ApprovalsCSA Certified|UL Listed
-
WarrantyLifetime
-
Specification Sheet
-
Owners/User Manual
-
Full Engineering Drawing
Recently Viewed
Woodhead® Watertite® wet location wiring devices are rated for high pressure hose down application up to 1000 psi, the benchmark for the industry. The only devices made of NEo-TEX® paracril OZO rubber, yields ultimate performance within a wide temperature range, around many oils, chemicals and abrasive conditions. Additional features include - unique multiple ring seals that lock snugly protecting against moisture and contaminants, sturdy compression-type cord grips that provide high pull-out strength and a protective closure cap that seals the connector when it is not in use. Woodhead® Watertite® products are time tested devices that professionals demand.
1/4" UHMW CUT 1/4" X 1-1/2" X 120"-CPI1/4X11/2X120 >
1-3/16" -ID HIGH PILLOW BLOCK UNIT-FYHEAP20619 >
MCR Safety 1440L Luminator™ General Purpose Gloves, Gunn Cut/Wing Thumb Style, Cowhide Leather Palm, 7 ga Cotton Thread/Leather/Polyester, Gray/Hi-Viz Orange Fabric/Silver Reflective/Yellow, Safety Cuff, Fleece Lining
Do they roll up the sidewalks in your town at sunset, not in the average American town. Men and women are up way passed sunset working in all types of environments. When the light is low and you need to be seen Luminator™ gloves will provide the protection you need. The 1440 features "A" select shoulder leather, hi-viz orange back with lime contrast and silver reflective stripes and a 2-1/2 in rubberized safety cuff.
GREEN BUMP CAP SAFETY HELMET-ERB19118>
ISOSTATIC™ Oilube® 402097 Round Bore Flange Bearing, 7/8 in Dia Bore, 1 in OD, 1 in W, 1-1/4 in Dia Flange
ISOSTATIC™ Oilube® 402097 Round Bore Flange Bearing, 7/8 in Dia Bore, 1 in OD, 1 in W, 1-1/4 in Dia Flange
