LEVITON 15-AMP BROWN DUPLEX WALL SWITCHES LEV 5224
Leviton combination devices offer pleasing, practical designs that fit standard wallboxes switch/switch, switch/receptacle and switch/pilot light combinations are Available. These devices come in a range of colors and are backed by a limited two-year warranty.
-
BrandLeviton®
-
UPC078477852248
-
Manufacturer Part Number5224
-
CountryUSA
-
MaterialThermoplastic
-
ColorBrown
-
TypeDuplex Non-Grounding
-
MountingWall
-
Contact Rating15 A at 120/277 V AC
-
SeriesTraditional
-
Number of Poles1
-
Size4.2 in H x 1.62 in W
-
Operating Cycles100
-
Electrical Ratings12 A, 0.5 hp at 120 V AC, 2 hp at 240 to 277 V AC
-
Environmental Conditions-40 to 65 deg C Operating Temperature
- AC quiet switches have silver cadmium oxide contacts and receptacles have double wire contacts for maximum conductivity
- All devices have a grounding screw except where noted
- Terminal screw accept up to #12 AWG copper or copper clad wire
- Fit in standard wallboxes
- Break-off tabs on devices with switches permit conversion to separate feeds
- Side wired terminal
-
Alternative Part Number7345620
-
UNSPSC39122231
-
IDEA Index ID7345620
-
Package DescriptionEACH
-
Standards/ApprovalsANSI C-73|UL 20|CSA C22.2 No. 111|CSA File No. 152105|NOM 057 Certified|NEMA WD-1/WD-6|UL 94 V-2 Flammability Rated
-
Warranty2 Years
-
Catalog
Recently Viewed
Leviton combination devices offer pleasing, practical designs that fit standard wallboxes switch/switch, switch/receptacle and switch/pilot light combinations are Available. These devices come in a range of colors and are backed by a limited two-year warranty.
WHITE T-CLAMPS >(EA)-TYTT3D0625 >
SCRUBBING PAD-RBMQ810>
4_100x100.jpg)
PVC ELECTRICAL RECEPTACLE COVERS-JWH511002>
6-MM X 20-MM STAINLESS STEEL FLAT HEAD SOCKET HEAD CAPSCREW-MET799106020SS >
Milwaukee® 48-20-6710 Drill Bit, 9/16 in Drill Bit, 9/16 in Shank SDS-Plus Shank, 10 in D Cutting, 12 in OAL
The MILWAUKEE® SDS Plus Rebar Cutters are the toughest in rebar, delivering up to 3x life in rebar compared to competitive rebar cutters. These bits, designed with precision ground carbide for rebar only drilling, provide up to 10x faster drilling speeds in rebar vs. 4-cutter drill bits. Milwaukee SDS Plus Rebar Cutters are equipped with HAMMER GUARD™ protective shanks, preventing carbide teeth destruction from accidental use in rotary hammer mode, saving time and money. Deep debris channels provide the fastest rebar shard removal while double ejection slots allow for easy rebar slug removal. Available in sizes 3/8” – 1-1/2”, Milwaukee SDS Plus Rebar Cutters are the optimal solution for drilling embedded rebar for corded and cordless SDS Plus rotary hammers. For use in rebar only.
