Markal® 086562 Thermomelt® Temperature Indicator, 250 deg F, 3/8 in Flat Tip
Thermomelt® HEAT-STIK® markers are a quick, low-cost method to accurately measure surface temperatures of various metals and equipment. Available in 88 Fahrenheit and 32 Centigrade temperatures, the stick-in-holder design provides convenience and durability for long-lasting use in the workshop or in the field.
-
BrandMarkal®
-
UPC048615865621
-
Manufacturer Part Number086562
-
CountryUSA
-
Temperature Rating250 deg F
-
Tip Size3/8 in
-
Tip TypeFlat
-
SeriesThermomelt®
- Long lasting stick is 33% bigger than competition
- Accurate to within +/-1% of Fahrenheit and +/-3% Celsius rated temperatures, no need for sensor calibration
- When the stick melts, the precise temperature is reached
- Ideal for pre-heating, post-weld heat treating, interpass temperature monitoring, stress-relieving and annealing
- Protective holder, shirt-clip and adjustment ring prevents breakage and improves handling
- Suitable for use on steel and iron
- The initial mark appears dull and chalky, when desired temperature is reached, the mark quickly melts to a glossy liquid
- Bigger design makes Thermomelt® the industry's longest lasting heat stick
- Gravity advance holder protects stick and prevents stick from slipping back inside holder
- 5 in long
-
UNSPSC23271800
-
Package Description12/CS
-
Standards/ApprovalsAWS D1.1|ANSI Specified|ASME B31.1|B31.3
Recently Viewed
Markal® 086562 Thermomelt® Temperature Indicator, 250 deg F, 3/8 in Flat Tip
Thermomelt® HEAT-STIK® markers are a quick, low-cost method to accurately measure surface temperatures of various metals and equipment. Available in 88 Fahrenheit and 32 Centigrade temperatures, the stick-in-holder design provides convenience and durability for long-lasting use in the workshop or in the field.
Selkirk® by Duravent Ultra-Temp® 208800 Type HT Round Top, Fits Duct Size: 10 in, 16 in W x 7 in H Cap
Part of the chimney system roof assembly, the Round Top is designed with a dome to exclude rain and leaves and a lower skirt to deflect wind for proper chimney draft. In the Sure-Temp-Type HT Chimney (5, 6, 7 and 8 in sizes) the Round Top is designed with three legs that slide down over the outside of the chimney. A cinch band is then positioned over the legs and tightened to hold the top firmly in place. This design makes cap removal for cleaning a breeze. In the 10, 12 and 14 in sizes, the Round Top is designed with a squeeze collar that fits inside the chimney pipe. The squeeze collar expands as a set screw is tightened to hold the top firmly in place.
Klein® 68206 Standard Box Wrench, 13/16 x 7/8 in Wrench, 12 Points, 9-1/4 in OAL, Polished Chrome
The Klein Tools Ratcheting Box Wrench is great for working in confined spaces and on long studs. This wrench has a different size opening on each end for multiple applications. Get reverse ratcheting action simply by turning the wrench over.
Markal® 080224 B® Paintstik® Solid Paint Crayon, 11/16 in Round Tip, Orange
Proto® TorquePlus™ J1073M Box End Wrench, 22 x 24 mm Wrench, 12 Points, 7.5 deg Offset, 348.2 in OAL, Alloy Steel, Full Polished, ASME B107.100, AS954E S3.8.1
Proto® TorquePlus™ J1073M Box End Wrench, 22 x 24 mm Wrench, 12 Points, 7.5 deg Offset, 348.2 in OAL, Alloy Steel, Full Polished, ASME B107.100, AS954E S3.8.1
GEARWRENCH® 85212 Double Box End Wrench, 16 x 17 mm, 18 x 19 mm Wrench, 12 Points, 0 deg Offset, 230 mm OAL, High Alloy Steel, Polished Chrome
The GEARWRENCH QuadBox™ double box ratcheting wrenches give you 4 sizes on 1 wrench, reducing your tool count and making more space in your tool box. Each box end has two usable sizes, one on either side, and levers on either end to swap the wrench's ratcheting direction without removing the wrench. The ratcheting box end is designed to need as little as 5° of swing arc to move fasteners, versus 30° for standard wrenches. These wrenches are also made from a strong alloy steel with a bright, full polish chrome finish. Each ratcheting box end features an off-corner loading design for a better grip on the fastener and reduced fastener rounding. The 0° offset on both ends of the wrench provides greater access to fasteners in the tightest spaces.
