Milwaukee® 48-20-6724 Drill Bit, 13/16 in Drill Bit, 13/16 in Shank SDS-Plus Shank, 10 in D Cutting, 12 in OAL
The MILWAUKEE® SDS Plus Rebar Cutters are the toughest in rebar, delivering up to 3x life in rebar compared to competitive rebar cutters. These bits, designed with precision ground carbide for rebar only drilling, provide up to 10x faster drilling speeds in rebar vs. 4-cutter drill bits. Milwaukee SDS Plus Rebar Cutters are equipped with HAMMER GUARD™ protective shanks, preventing carbide teeth destruction from accidental use in rotary hammer mode, saving time and money. Deep debris channels provide the fastest rebar shard removal while double ejection slots allow for easy rebar slug removal. Available in sizes 3/8” – 1-1/2”, Milwaukee SDS Plus Rebar Cutters are the optimal solution for drilling embedded rebar for corded and cordless SDS Plus rotary hammers. For use in rebar only.
-
BrandMilwaukee®
-
UPC045242619337
-
Manufacturer Part Number48-20-6724
-
CountryUSA|Canada
-
MaterialSolid Carbide
-
Flute Length10 in
-
Applicable MaterialsRebar
-
Cutting Depth10 in
-
Shank Size13/16 in
-
Shank TypeSDS-Plus
-
Drill Bit FunctionMasonry
-
Drill Bit Size13/16 in
-
Overall Length12 in
- HAMMER GUARD protective shank protects teeth from accidental hammer impacts
- Precision ground carbide for faster drilling
- Fits all SDS Plus Rotary Hammers
- Available in sizes 3/8 in 1-1/2 in
- Deep debris channels provide fastest rebar shard removal for increased productivity
- Double ejection slots for easy rebar slug removal
- Fits all SDS Plus Rotary Hammers
- Available in sizes 3/8 in - 1-1/2 in
- Available in sizes 3/8 in - 1-1/2 in
-
Alternative Part Number19555834
-
UNSPSC23242101
-
IDEA Index ID19555834
-
Package DescriptionEACH
-
WarrantyNo Warranty
Recently Viewed
Milwaukee® 48-20-6724 Drill Bit, 13/16 in Drill Bit, 13/16 in Shank SDS-Plus Shank, 10 in D Cutting, 12 in OAL
The MILWAUKEE® SDS Plus Rebar Cutters are the toughest in rebar, delivering up to 3x life in rebar compared to competitive rebar cutters. These bits, designed with precision ground carbide for rebar only drilling, provide up to 10x faster drilling speeds in rebar vs. 4-cutter drill bits. Milwaukee SDS Plus Rebar Cutters are equipped with HAMMER GUARD™ protective shanks, preventing carbide teeth destruction from accidental use in rotary hammer mode, saving time and money. Deep debris channels provide the fastest rebar shard removal while double ejection slots allow for easy rebar slug removal. Available in sizes 3/8” – 1-1/2”, Milwaukee SDS Plus Rebar Cutters are the optimal solution for drilling embedded rebar for corded and cordless SDS Plus rotary hammers. For use in rebar only.
LockNLube® GC81042 GC Coupler, For Use With Shielded PTO Shafts, Axles, Harvester Heads, U Joints and other Recessed Grease Fittings, 1/8 in NPTF, 10000 psi Pressure, 5/8 in Dia, Steel/Nitrile Rubber, Silver
Rated to 10000 PSI, Locks on, stays on. Does not leak once locked on. Hands free does not pop off under pressure. Easily release from fittings with the thumb lever, even at extreme pressure. No more broken Zerks, Over 3.5 in of reach. Great for shielded PTO shafts, axles, harvester heads, U Joints and other recessed grease fittings. Fits all standard Grease Guns 1/8 NPT fitting. Fits all SAE and Metric Zerk fittings. Simply replace your existing coupler.Includes rebuild kit. Easily replace seal and jaws without replacing the coupler. Old/retired SKUs for this product include: GCXL, GC81032
1/2" SINGLE PULLEY-NTL243568 >
Milwaukee® 48-25-4125 Standard Self-Feed Bit, 4-1/8 in Dia, 4 in OAL, 7/16 in Shank
Milwaukee® Selfeed drill bits deliver speed and endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, Selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee Selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these Selfeed bits are resharpenable so you can keep them cutting like new. Two feed screws are included.
Milwaukee® 48-20-6774 4-Cutter Rebar Cutter, 1/2 in Drill Bit, 0.5 in Shank 3-Flat Shank, 10 in D Cutting, 8 in OAL
The MILWAUKEE® Straight Shank Rebar Cutters are the toughest in rebar, delivering up to 3x life in rebar compared to competitive rebar cutters. These bits, designed with precision ground carbide for rebar only drilling, provide up to 10x faster drilling speeds in rebar vs. 4-cutter drill bits. These rebar cutters are equipped with deep debris channels for the fastest rebar shard removal and double ejection slots for easy rebar slug removal. Each bit is designed with a 3-flat shank, providing users with better grip and control. Available in sizes 3/8” – 1-1/2”, Milwaukee Straight Shank Rebar Cutters are the optimal solution for drilling embedded rebar for corded and cordless ½" hammer drills/drivers. For use in rotation mode only. For use in rebar only.
Milwaukee® 48-27-1371 Flat Boring Bit, 1-3/8 in Dia, 6-3/8 in OAL, Flat Flute, 1/4 in Shank
For fast, small hole drilling in wood, count on Milwaukee's premium quality 1-3/8 in. flat boring bit. Made of heat treated high carbon steel, the flat boring bit bores clean holes at any angle in wood, plastic, plywood and Formica. The drill point and cutting edges can be resharpened often for economical hole drilling. Bit offers a 6 in. drilling depth but can be used with 12 in. extension, 48-28-3350, for extended deep hole drilling. One per package.
