Weller® 7135W Standard Soldering Tip, For Use With 8200 and 9200 Universal Soldering Guns, 4.19 mm OD x 22.48 mm L, Copper
Weller® 7135W Standard Soldering Tip, For Use With 8200 and 9200 Universal Soldering Guns, 4.19 mm OD x 22.48 mm L, Copper
-
BrandWeller®
-
UPC037103475657
-
Manufacturer Part Number7135W
-
CountryUSA|Canada
-
MaterialCopper
-
TypeStandard
-
Specifications4.19 mm OD x 22.48 mm L
-
Suitable For Use With8200 and 9200 Universal Soldering Guns
- For consumer soldering guns
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 31LV99 |
| Grainger | 31LV99 |
-
UNSPSC23271809
-
Package Description2/BG
-
Warranty1 Year
-
Specification Sheet
Recently Viewed
Weller® 7135W Standard Soldering Tip, For Use With 8200 and 9200 Universal Soldering Guns, 4.19 mm OD x 22.48 mm L, Copper
Weller® 7135W Standard Soldering Tip, For Use With 8200 and 9200 Universal Soldering Guns, 4.19 mm OD x 22.48 mm L, Copper
MORSE® DRILL-MILL™ 44624 1980 Regular Length Single End End Mill, 7/16 in Dia, 90 deg Point, 2 Flutes, 1-1/32 in L Flute, 1-1/32 in L of Cut, 2-23/32 in OAL, Bright
MORSE® DRILL-MILL™ 44624 1980 Regular Length Single End End Mill, 7/16 in Dia, 90 deg Point, 2 Flutes, 1-1/32 in L Flute, 1-1/32 in L of Cut, 2-23/32 in OAL, Bright
Sealmaster® 1500400000 3-Piece Precision Grade General Purpose Bearing Rod End, 1/4 in Dia Bore, 3/4 in OD, 3/8 in W, 1700 lb Static Load, Carbon Steel
Sealmaster® two and three piece rod end bearing housing designs have been optimized for overall strength. This housing advantage and variety of outer race materials including brass, steel, Delrin® and PTFE liners provide a wide selection of application solutions. Sealmaster® rod end bearings can be joined together or connected with a threaded rod or tube as linkage assemblies for flexibility in motion transfer. In addition Sealmaster® rod end bearings can accommodate angular misalignment to provide ease in assembly and smooth motion transfer in a variety of applications.
FYH® NA211 34 NA Series Cylindrical Insert Bearing, 2-1/8 in Dia Bore, 2.81 in W, 43.4 kN Dynamic/29.4 kN Static Load
FYH® NA211 34 NA Series Cylindrical Insert Bearing, 2-1/8 in Dia Bore, 2.81 in W, 43.4 kN Dynamic/29.4 kN Static Load
18-DIN-9-6-SB 3/8"-hose X M18x1.5 Fem
3/8"-HOSE X M18X1.5 FEM DIN LIGHT-DAY18DIN96SB>
Dichtomatik 67004452 O-Ring, 60 mm ID x 68 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
