Harris #2 Propane Style Cut FOR60435
HARRIS #2 PROPANE STYLE CUTTING TIP
Recently Viewed
HARRIS #2 PROPANE STYLE CUTTING TIP
Loctite Super Bonder 415 clear cyanoacrylate adhesive is compatible with metal, plastic and rubber materials with a 24 hr cure time. Provides a 30 sec fixture time. Delivers great performance with a shear strength of 3600 psi, tensile strength of 1740 to 3625 psi and peel strength of 2.8 pli. Minimum to maximum operating temperatures are -65 F to +180 F. Comes in a 1 oz Bottle. This cyanoacrylate
Proto® J47000CF Anti-Slip Crowfoot Wrench Set, 6 Pieces, 1/4 to 9/16 in, Full Polished
The MRC R4ZZ is an inch-series, single-row radial deep groove ball bearing manufactured by MRC (a brand under SKF). It is a small Conrad-type bearing designed for high-speed industrial automation and motion control applications that handle radial and moderate thrust loads. Key Specifications Bore Diameter (Inner): 0.2500 inches (1/4 in) Outside Diameter: 0.6250 inches (5/8 in) Width: 0.196 inches (approx. 5 mm) Enclosure Type: Double shielded/sealed ("ZZ" indicates two protective closures to keep grease in and dirt out) Load Capacities: Supports a 332 lbf dynamic load and a 139 lbf static load Precision Rating: ABEC-1 standard industrial precision
metabo® 600380420 Electric Angle Grinder, 4-1/2 in Dia Wheel, 5/8-11 UNC Arbor/Shank, 110 to 120 VAC
The LKN Series are fuse links designed for Littelfuse RLN series renewable fuses. Traditionally, Class H fuses were used to provide low cost protection of general purpose feeder and branch circuits where available short-circuit currents did not exceed 10,000 amperes. However, generally increased levels of available fault current and the distinct possibility that renewable fuses may be improperly renewed, rendering them unsafe, have all but eliminated the use of these fuses in new applications. In addition, escalating labour costs and increasing automation, which makes downtime very expensive, have greatly reduced or eliminated the cost savings attributed to renewable fuses.
