WATTS® 0220071 77SI Wye Strainer With #20 Mesh Screen, 1/2 in Nominal, 3-3/16 in OAL, FNPT Connection, Graphite Softgoods, Import
This cast iron wye pattern strainer, 1/2 inch Watts Model 77SI, is designed to protect system components from dirt, rust, and other damaging debris in the piping system. It is used in steam and liquid applications and it is furnished with a machined seat that allows the screen to be self-aligning to assure a perfect fit.
-
BrandWATTS®
-
UPC098268011685
-
Manufacturer Part Number0220071
-
CountryUSA
-
Connection TypeFNPT
-
Nominal Size1/2 in
-
Series77SI
-
Softgoods MaterialGraphite
-
Domestic/ImportImport
-
Blow-Off Size1/4 in NPT
-
Body MaterialCast Iron
-
Overall Length3-3/16 in
- Wye pattern
- Threaded connections
- Non-asbestos gasket and blow-down connection for greater confidence
- The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average
- Wye pattern
-
Alternative Part Number77SI 1/2
-
UNSPSC40142505
-
Package DescriptionEACH
-
Standards/ApprovalsASSE Listed|FM Approved|UL Listed|ULC Listed|USC Certified
-
Warranty1 year Limited
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
WATTS® 0220071 77SI Wye Strainer With #20 Mesh Screen, 1/2 in Nominal, 3-3/16 in OAL, FNPT Connection, Graphite Softgoods, Import
This cast iron wye pattern strainer, 1/2 inch Watts Model 77SI, is designed to protect system components from dirt, rust, and other damaging debris in the piping system. It is used in steam and liquid applications and it is furnished with a machined seat that allows the screen to be self-aligning to assure a perfect fit.
Southwire® Madison Electric 25BC Beam Clamp, 1 in Conduit, Steel
3/4" X 60-YD PINK TRANSFER TAPE-CANTN25PINK >
Channellock® 318 E SERIES™ XLT™ High Leverage Long Nose Plier, Cross Hatched/Serrated High Carbon Steel Jaw, 2.96 in L x 45/64 in W Jaw, 8 in OAL, 0.13 in W Tip
The Channellock® E SERIES™ line-up features Xtreme Leverage Technology (XLT™) for considerably less force required to cut than traditional high leverage designs. Crosshatch jaws provide maximum grip and the pipe grip design accommodates many shapes. Laser heat-treated cutting edges last longer and easily cut hard and soft wire. The streamlined design is sleeker and lighter for easier handling.
Channellock® 326 Long Nose Plier With Side Cutter, 2.08 in L x 3/4 in W, Cross Hatched High Carbon Steel Jaw, 6.1 in OAL
CHANNELLOCK® Long Nose Pliers are engineered to operate in tight spaces. A crosshatched teeth pattern provides reliable grip in either direction, while a narrow nose profile provides extra precision.
STAPLE ,SOLD BY CASE OF 20,000-PASC34 >
