Armstrong® 25-012 Open End Regular Length Combination Wrench, 3/8 in, 6 Points, 15 deg Offset, 5-1/2 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Armstrong® 25-012 Open End Regular Length Combination Wrench, 3/8 in, 6 Points, 15 deg Offset, 5-1/2 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
-
BrandArmstrong®
-
UPC781412250121
-
Manufacturer Part Number25-012
-
CountryUSA
-
Finish/CoatingPolished Chrome
-
MaterialHigh Alloy Steel
-
Measurement SystemImperial
-
TypeOpen End Regular Length
-
Handle TypeFlat
-
Head Angle15 deg
-
Wrench Opening3/8 in
-
Number of Points6
-
Specifications MetASME B107.6-1994
-
Offset Angle15 deg
-
Open End Thickness0.23 in
-
Open End Width0.8 in
-
Overall Length5-1/2 in
-
Box End Thickness0.29 in
-
Box End Width0.66 in
- Box ends incorporate a radius corner design that engages the flats of the fastener, not the corners, providing up to 15 to 20% more torque while reducing fastener rounding, enhancing the turning of worn fasteners
- Box ends are offset a true 15 deg for clearing obstructions and knuckle clearance on flat surfaces
- Open end has a radius design for greater strength; especially when compared to a hex open end
- Large size stamp on both sides of the wrench for ease in identification
- Full polish chrome finish provides smooth edges with a high luster
- Manufactured from high alloy steel using the most up-to-date manufacturing process and heat treat for greater strength and durability
| Competitor Name | Competitor Part Number |
|---|---|
| MSC | 86998549 |
-
UNSPSC27111713
-
Standards/ApprovalsUS Federal Specification GGG-W-636E
Recently Viewed
Armstrong® 25-012 Open End Regular Length Combination Wrench, 3/8 in, 6 Points, 15 deg Offset, 5-1/2 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Armstrong® 25-012 Open End Regular Length Combination Wrench, 3/8 in, 6 Points, 15 deg Offset, 5-1/2 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Milwaukee® MX4™ 48-20-7215 4-Cutter Rotary Hammer Drill Bit, 3/4 in Drill Bit, 25/64 in, 10 in D Cutting, Carbide Cutting Edge, 12 in OAL
The MILWAUKEE® SDS Plus 4-Cutter MX4™ 3/4" X 10" X 12" Drill Bits with solid head carbide deliver up to 5X longer life in concrete with rebar. Engineered with rebar guards to provide maximum durability in hard aggregate and rebar with a 4-cutter design that prevents lock-up, reducing downtime. The sharp centering tip offers exact spot drilling in concrete and metal decking. Variable flutes remove dust faster, reducing heat and delivering up to 20% more holes per battery charge. A wear mark indicator shows end of life and when bit no longer meets the ANSI requirement. The Milwaukee MX4™ 4-Cutter Drill Bits are ideal for concrete with rebar and masonry applications.
Proto® TorquePlus™ J1218MES Combination Wrench, 18 mm Wrench, 12 Points, 15 deg Offset, 5-1/4 in OAL, Alloy Steel, Full Polished, ASME B107.100-2010
Proto® TorquePlus™ J1218MES Combination Wrench, 18 mm Wrench, 12 Points, 15 deg Offset, 5-1/4 in OAL, Alloy Steel, Full Polished, ASME B107.100-2010
Klein® NCVT3P Dual Range Non-Contact Voltage Tester With Flashlight, 70 to 1000 V AC/12 to 1000 V AC Max Measurable
The NCVT-3P is a non-contact voltage tester with an integrated flashlight. The voltage sensor detects 12 to 1000V AC and indicates the presence of voltage in cables, cords, circuit breakers, light fixtures, switches, outlets and wires as well as AC voltage in doorbells, thermostats, low voltage lighting and irrigation systems. Includes both visual and audible signals. The NCVT-3P is rugged enough for any job site.
HCI Preferred Supplier 24051212 Straight Connector, 3/4 in x 1-1/16-12 Nominal, 37 deg SAE Male JIC Flare x FNPT, Steel
HCI Preferred Supplier 24051212 Straight Connector, 3/4 in x 1-1/16-12 Nominal, 37 deg SAE Male JIC Flare x FNPT, Steel
ITM SP02514 Bit Screwdriver, #14 Point, 1 in OAL
