Asco Redhat® 8210G095 2-Way 2-Position NC Solenoid Valve, 3/4 in Nominal, NPT End Style, 150 psi AC, 40 psi DC Pressure, Brass Body
Asco Redhat® 8210G095 2-Way 2-Position NC Solenoid Valve, 3/4 in Nominal, NPT End Style, 150 psi AC, 40 psi DC Pressure, Brass Body
-
BrandAsco
-
Manufacturer Part Number8210G095
-
CountryUSA
-
Pressure Rating150 psi AC, 40 psi DC
-
Top to Inlet Center3.44 in
-
MediaAir/Water/Light Oil/Non-Corrosive Fluid/Inert Gas
-
Type2-Way 2-Position NC
-
Actuator TypePilot Operated
-
Nominal Size3/4 in
-
Series8210
-
Inlet to Outlet Length2.81 in
-
Dimensions2.29 in W x 4.13 in H
-
Softgoods MaterialNBR
-
Body MaterialBrass
-
Orifice Size3/4 in
-
End StyleNPT
- Wide range of pressure rating, size and resilient material provide long service life and low internal leakage
- PA disc-holder
- Two-way (2/2) general service solenoid valve have one inlet port and one outlet port
- Redhat® type-1 enclosure
-
UNSPSC40141605
-
Standards/ApprovalsCSA/CE Certified|UL Listed
-
Specification Sheet
-
Catalog
Recently Viewed
Asco Redhat® 8210G095 2-Way 2-Position NC Solenoid Valve, 3/4 in Nominal, NPT End Style, 150 psi AC, 40 psi DC Pressure, Brass Body
Asco Redhat® 8210G095 2-Way 2-Position NC Solenoid Valve, 3/4 in Nominal, NPT End Style, 150 psi AC, 40 psi DC Pressure, Brass Body
RING TERMINALS WITH SHRINK TUBE-DEL953105 >
Campbell® 6423105 GX Series Structural Short Leg Plate Clamp, 1 ton Load, 1/16 to 3/4 in Jaw Opening, 4-3/4 in OAW, Forged Steel, Load Activated Locking
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
Browning® 1296433 Automatic Torque Limiter, 1 in Straight Bore, 4-1/2 in OD, 2800 in-lb (1 Spring)/4900 in-lb (2 Spring) Torque
Browning® torque limiters are torque control devices that slip under excessive load but automatically carry the desired load after the excess has been removed. The device can be easily adjusted to slip at a desired overload and automatically re-engage when overload is removed. Overload should be removed promptly since prolonged slippage can be detrimental to the friction disc. Generally, no resetting is required after the torque limiter has slipped. Torque limiters help prevent machine and product damage and costly downtime caused by shock loads, overloads or machine jams but should not be used as clutches.
42W T3" SPIRAL CFL BULB-JWH518746 >
BV-1 AIR COMPRESSOR HEAD GASKET - CACB31>
