WATTS® 0009236 LF25AUB-Z3 Pressure Reducing Valve, 1/2 in Nominal, FNPT Union x FNPT End Style, 10 to 35 psi Pressure, Cast Copper Silicon Alloy Body
This 1/2 inch lead free brass water pressure reducing valve for low pressure ranges is designed to reduce incoming water pressure to protect plumbing systems and reduce water consumption for commercial, industrial and residential applications. The easy maintenance assembly consists of a replaceable seat module, NPT threaded female union inlet by NPT female outlet and a bypass feature to control thermal expansion pressure. The temperature range is 33 to 180 degrees F (0.5 to 82 degrees C). The low pressure range is 10 to 35 psi (69 to 241 kPa) with the standard setting at 30 psi (207 kPa).
-
BrandWATTS®
-
UPC098268329414
-
Manufacturer Part Number0009236
-
CountryUSA|Canada
-
Temperature Rating33 to 160 deg F
-
Pressure Range10 to 35 psi
-
Top to Inlet Center7 in
-
MediaWater
-
Nominal Size1/2 in
-
SeriesLF25AUB-Z3
-
Inlet to Outlet Length5-3/8 in
-
Softgoods MaterialReinforced EPDM Diaphragm/Polymer Seat
-
Body MaterialCast Copper Silicon Alloy
-
End StyleFNPT Union x FNPT
- Replaceable seat module
- Serviceable in line
- Bypass feature controls thermal expansion pressure
- Low pressure applications
- Integral stainless steel strainer removable for cleaning
- Sealed spring cage with stainless steel cage screws
| Competitor Name | Competitor Part Number |
|---|---|
| Ferguson | WLF25AUBLPZ3D |
-
Alternative Part NumberLF25AUB-LP-Z3 1/2
-
UNSPSC40141652
-
Package DescriptionEACH
-
Standards/ApprovalsANSI A112.26.2|ASSE Standard 1003|CSA Standard B356|IAPMO Listed|MIL-V-18146B Type I|NSF Approved|Southern Standard Plumbing Code|PROP65: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm.
-
Warranty1 year Limited
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
WATTS® 0009236 LF25AUB-Z3 Pressure Reducing Valve, 1/2 in Nominal, FNPT Union x FNPT End Style, 10 to 35 psi Pressure, Cast Copper Silicon Alloy Body
This 1/2 inch lead free brass water pressure reducing valve for low pressure ranges is designed to reduce incoming water pressure to protect plumbing systems and reduce water consumption for commercial, industrial and residential applications. The easy maintenance assembly consists of a replaceable seat module, NPT threaded female union inlet by NPT female outlet and a bypass feature to control thermal expansion pressure. The temperature range is 33 to 180 degrees F (0.5 to 82 degrees C). The low pressure range is 10 to 35 psi (69 to 241 kPa) with the standard setting at 30 psi (207 kPa).
Zurn® QickTite® QC55F Unassembled Female Coupling, 1 in Nominal, FNPT End Style
2" -FEMALE PIPE THREADX1" -FEMALE PIPE THREAD BLACK REDUCER-JPW2X1BR >
2.5" 400-PSI 1/4" -BACK MOUNT GAUGE-DXNGC347 >
Leviton® 515CA Cable Mount Armored Grounding Straight Blade Connector, 125 V AC, 15 A, 2 Poles, 3 Wires, Yellow
Leviton® offers a large selection of 15, 20, 30 and 50 A commercial grade straight blade plugs and connectors, available in a wide variety of features. These rugged performers are moisture, chemical and abuse resistant and they are ideal for indoor and outdoor use. Our EPTR rubber backed plugs and connectors stand up to rough use, protecting against dirt and moisture. The deep slotted, backed out terminal screws draw back wire clamps securely over stripped leads for maximum conductivity.
Milwaukee® 49-22-8310 Quick-Change Electrician's Hole Saw Sheet Cutter Kit, 7 Pieces, For Use With 49-57-0035 and 49-57-0037 Quick-Change Arbor, Carbide Tip
For materials up to 3/16 in. these Carbide tipped sheet metal cutters produce fine, burr-free holes in a variety of materials. They are ideal for stainless steel, structural steel studs and electrical boxes. They can also improve your production in cast iron, brass, aluminum and other thin non-ferrous metals. These cutters are designed to be used in hand held drills to achieve drill press quality holes. The Carbide tips stay sharper longer than high-speed steel or bi-metal cutters giving these cutters longer life. Lubrication during drilling extends the life of the Carbide cutter. Milwaukee recommends the use of Hawg wash cutting fluid for best results. Hawg wash fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution. Arbors 49-57-0035 or 49-57-0037 are needed for these cutters.
