NIBCO 62-108-01 In-Line Check Valve, 2 in Nominal, FNPT End Style, 81 gpm Flow Rate, Stainless Steel Body, Domestic
The 62-100 Series is uniquely suited for applications in corrosive environments, including chemical processing, pulp and paper and other process industries. The rugged stainless steel body and RPTFE ball check provide reliable, patented protection against reverse flow.
-
BrandApollo™
-
UPC670750633607
-
Manufacturer Part Number6210801
-
CountryUSA
-
Low Lead ComplianceNo
-
Temperature Rating350 deg F
-
Pressure Rating400 psi CWP
-
Flow Rate81 gpm
-
Trim MaterialStainless Steel
-
Actuator TypeSpring
-
Nominal Size2 in
-
Series62-100
-
Inlet to Outlet Length6 in
-
Domestic/ImportDomestic
-
Body MaterialStainless Steel
-
End StyleFNPT
- Unique design
- Spring-loaded for fast seating action
- Center guided so that radial alignment is never needed
- Straight-through flow minimizes pressure loss
- Stainless Steel Spring
- 0.5 psig cracking pressure
| Competitor Name | Competitor Part Number |
|---|---|
| Ferguson | A6210801 |
-
Alternative Part NumberCVS2
-
UNSPSC40141622
-
Package Description1/BX
-
Standards/ApprovalsASTM A351 Retainer CF8M Valve Body|RoHS Compliant|US Patent 4172465|PROP65: Cancer and Reproductive Harm
-
Warranty5 Years
-
Warranty Information
-
Specification Sheet
-
Owners/User Manual
Recently Viewed
NIBCO 62-108-01 In-Line Check Valve, 2 in Nominal, FNPT End Style, 81 gpm Flow Rate, Stainless Steel Body, Domestic
The 62-100 Series is uniquely suited for applications in corrosive environments, including chemical processing, pulp and paper and other process industries. The rugged stainless steel body and RPTFE ball check provide reliable, patented protection against reverse flow.
OMEGA II SUNSHIELDS 17972-ERBAS5E>
Apex® 440-TX-25-H Tamper-Resistant Insert Bit, T25 Torx® Point, 1 in OAL
ISOSTATIC™ Oilube® 601160 Round Bore Sleeve Bearing, 12 mm Dia Bore, 16 mm OD, 16 mm W
ISOSTATIC™ Oilube® 601160 Round Bore Sleeve Bearing, 12 mm Dia Bore, 16 mm OD, 16 mm W
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
RIDGID® 33927 345/150DL Manual Flare Tool, 3/16 to 5/8 in Nominal, Sliding T-Handle Handle
RIDGID® 33927 345/150DL Manual Flare Tool, 3/16 to 5/8 in Nominal, Sliding T-Handle Handle
