GENERAL® 452-6 Spring Outside Caliper, 0 to 6-5/16 in Measuring, Graduations 1/8 in, 1/16 in, 1/32 in and 1/64 in, Steel
GENERAL® 452-6 Spring Outside Caliper, 0 to 6-5/16 in Measuring, Graduations 1/8 in, 1/16 in, 1/32 in and 1/64 in, Steel
-
BrandGENERAL®
-
UPC038728316189
-
Manufacturer Part Number452-6
-
CountryUSA
-
MaterialSteel
-
Measuring Range0 to 6-5/16 in
-
TypeSpring
-
Graduations1/8 in, 1/16 in, 1/32 in and 1/64 in
-
Dimensions6 in L
-
Nut TypeSelf-Seating
-
Leg TypeFlat
- Legs made of special caliper steel, with hardened measurement points
- Hardened and tempered bow springs and fulcrum spools assure uniform tension without side play
- Adjusting screw's self-seating washer and nut enable quick and positive adjustment
- The #452-6 6 in outside caliper can measure outside dimensions
| Cross-Reference Number |
|---|
| 319074 |
-
UNSPSC41111600
-
Standards/ApprovalsGGG-C-95
-
Warranty1 Year
-
Catalog
Recently Viewed
GENERAL® 452-6 Spring Outside Caliper, 0 to 6-5/16 in Measuring, Graduations 1/8 in, 1/16 in, 1/32 in and 1/64 in, Steel
GENERAL® 452-6 Spring Outside Caliper, 0 to 6-5/16 in Measuring, Graduations 1/8 in, 1/16 in, 1/32 in and 1/64 in, Steel
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
10" X 2-1/2" X 1" CASTER WHEEL-EZRWFZ1025CMORR1 >
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
BBI 087524 Partially Threaded Cap Screw, 3/4-10, 4 in L Under Head, 5 Grade, Carbon Steel, Zinc CR+3
BBI 087524 Partially Threaded Cap Screw, 3/4-10, 4 in L Under Head, 5 Grade, Carbon Steel, Zinc CR+3
THE MOST COMMON INTERNAL RETAINING RING FOR A 7-3/4" DIAMETER APPLICATION WITH A THICKNESS OF 0.187", CRAFTED FROM CARBON STEEL WITH A PHOSPHATE FINISH.
