Justrite® 28659 EcoPolyBlend™ Accumulation Center, 6 Drums, 73 gal Spill, 7500 lb Load, 100% Recycled Polyethylene
Combine units to create your own customized spill-control system. Low-profile centers only measure 5.5‐inches (140‐mm) high for easy handling of drums. Made with 100% recycled polyethylene, these accumulation centers are nearly impervious to chemicals, including acids and corrosives. Seamless construction eliminates leaks, making them ideal for drum filling and dispensing operations. Self-locating grates won’t ride‐up, and are removable for easy cleaning. Combine 2-, 4-, 6-, and 8-drum modular units to create your own customized system. Use the optional joining clips to firmly lock units together. Sumps remain separate and clips can be removed for easy repositioning. Also available in non-recycled yellow color. Use optional Sump-to-Sump™ drain kit (includes joining clips and transfer tube) for applications requiring a continuous sump. Kit allows you to join centers together, on-site, for full compliance with regulations when sump capacities reach 71‐gallons (270‐liters). Kit includes one pair stainless steel joining clips, one pair rubber grommets, one polytetrafluoroethylene (PTFE) transfer tube. (Patent No US 6,622,879,B1) EPA compliant, supports SPCC, and meets NFPA 1 2009 edition and IFC fire codes. Used for secondary spill control with the ability to combine units to customize your system.
-
BrandJustrite®
-
UPC697841132726
-
Manufacturer Part Number28659
-
CountryUSA|Canada
-
Load Capacity7500 lb
-
Material100% Recycled Polyethylene
-
ColorBlack
-
Height5-1/2 in
-
Width73 in
-
SeriesEcoPolyBlend™
-
Length49 in
- Use optional joining clips (28926) to firmly lock units together to combine 2-, 4-, 6-, and 8-drum modular units to create your own customized system
- Made from polyethylene, these accumulation centres are nearly impervious to chemicals, including acids and corrosives
- Low-profile centres only measure 14 cm high for easy handling of drums
- Self-locating grates wont ride-up and are removable for easy cleaning
- Sumps remain separate and clips can be removed for easy repositioning
- Sump base also available in non-recycled yellow colour
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 4WLW6 |
-
UNSPSC24101907
-
Package DescriptionEACH
-
Standards/ApprovalsUL/ULC Listed|EPA 40 CFR 264.175|NFPA 1 60.3.2.10/2704.2.3/30 9.13.1|OSHA 29 CFR 1910.106(e)(2)(iii)|SPCC Compliant
Recently Viewed
Justrite® 28659 EcoPolyBlend™ Accumulation Center, 6 Drums, 73 gal Spill, 7500 lb Load, 100% Recycled Polyethylene
Combine units to create your own customized spill-control system. Low-profile centers only measure 5.5‐inches (140‐mm) high for easy handling of drums. Made with 100% recycled polyethylene, these accumulation centers are nearly impervious to chemicals, including acids and corrosives. Seamless construction eliminates leaks, making them ideal for drum filling and dispensing operations. Self-locating grates won’t ride‐up, and are removable for easy cleaning. Combine 2-, 4-, 6-, and 8-drum modular units to create your own customized system. Use the optional joining clips to firmly lock units together. Sumps remain separate and clips can be removed for easy repositioning. Also available in non-recycled yellow color. Use optional Sump-to-Sump™ drain kit (includes joining clips and transfer tube) for applications requiring a continuous sump. Kit allows you to join centers together, on-site, for full compliance with regulations when sump capacities reach 71‐gallons (270‐liters). Kit includes one pair stainless steel joining clips, one pair rubber grommets, one polytetrafluoroethylene (PTFE) transfer tube. (Patent No US 6,622,879,B1) EPA compliant, supports SPCC, and meets NFPA 1 2009 edition and IFC fire codes. Used for secondary spill control with the ability to combine units to customize your system.
Leviton® 8101 1-Circuit 2-Piece Keyless Lampholder, 660 W Lamp, 250 V AC, E26 Lamp
Leviton® 8101 1-Circuit 2-Piece Keyless Lampholder, 660 W Lamp, 250 VAC, Medium Incandescent Lamp
Safety relief valves guard against over pressure conditions in compressors and other pressure vessels. These units are manufactured out of brass bar stock to ensure a non-porous, strong fitting. Seats are silicon rubber to provide a long leak free service life. These valves are ASME approved.
Wilton® WL9-28833 Round Channel Machinist Vise, Serrated Jaw, 10 in Jaw Opening, 6 in W Hardened Steel Jaw, 5-1/2 in D Throat
Proudly made in the USA, the machinist vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut the machinist round channel vise nut is anchored at the rear to provide straight line pull and even pressure resulting in greater durability. The round channel design also allows for a completely enclosed spindle and nut assembly which keeps debris out and lubrication in for a lifetime of smooth operation. The machinist vise is equipped with main jaws and a machined anvil work surface.
National Hardware® N102-459 V30 Safety Hasp, 6 in L x 1-3/4 in W, 0.08 in THK, Hot Rolled Steel
Shop-Vac® 9061600 Crevice Tool, 1-1/4 in Dia, For Use With 1-1/4 in Vacuum Hoses and 1-1/4 Wand Ends (opening about the Size of a Golf Ball), Plastic, Black
Shop-Vac® 9061600 Crevice Tool, 1-1/4 in Dia, For Use With 1-1/4 in Vacuum Hoses and 1-1/4 Wand Ends (opening about the Size of a Golf Ball), Plastic, Black
