Justrite Manufacturing

Safety Daub Cans are constructed of galvanized steel with a baked on powder coat finish. With a 1/2 pint capacity this can is designed for safer cleaning of small parts or swabbing of larger ones. Features a brass flame arrestor dasher screen and pump assemblies. When the dasher plate is pushed down, the safety can dispenses a small amount of liquid to easily moisten sponges or rags without messy or dangerous spills. FM approved and meet OSHA standards.

BRASS VERTICAL DRUM VENT - JUS8101>

Self-closing, leakproof lid provides safety from spills. Designed with a single spout for filling and pouring, the sealed lid features automatic positive-pressure relief that vents between 3 and 5 psig (0.2 and 0.35 bar) to guard against rupture or explosion. Made from high-grade coated steel, each can is tested to guarantee 100% leakproof construction. The tough powder-coat finish resists chemicals and stands up to demands of rigorous use. Each Justrite safety can is equipped with a stainless steel flame arrester which dissipates heat to stop flashback ignition. Cans up to 1 quart (1 L) feature a trigger-release handle, while larger capacities have a swinging handle to greatly ease carrying of heavier loads. Large label ID zone on swing-handle cans provides writing space to identify contents, department location, or individual user name. Certified by FM, UL/ULC, and TÜV, Justrite safety cans also meet OSHA and NFPA requirements, and come with a ten-year warranty. For safe storage and transport of flammable liquids to protect workers and reduce risk of fire and explosions during transporting, transferring, storing and dispensing flammable liquids in industries like pharma, chemical and oil and gas.

Safety fill vents and funnels fit the 2 in bung on a vertically-stored drum. The brass vent provides automatic pressure and vacuum relief and includes a brass cap with safety chain tethered to the vent to prevent misplacement or loss. Remove cap during drum filling operations. Model no. 08211 includes a 9 in wide polyethylene funnel to facilitate solvent waste disposal and reduce spillage. Keep vent capped in closed position after filling operations to prevent flammable vapor from escaping. 6 in flame arrester safely dissipates heat and prevents flashback from external ignition sources.

Justrite® 27615 Dip Tank, 5 gal Capacity, 13-3/8 in Dia x 13 in H, Galvanized Steel, Red

Justrite® 8902 Faucet, Brass Body

Justrite’s Biohazard Waste Containers meet OSHA 29 CFR 1910.1030 for the segregation of infectious waste. Use them to store contaminated laundry as well as other regulated waste; however, not for the storage of sharps. Sturdy steel cans feature leakproof construction with foot-operated, self-closing lid. Simple, foot pedal operation opens the cover automatically to safely dispose of biohazard waste. Upon release of the pedal, the can cover closes quickly to reduce the risk of contamination. A biohazard bag is held securely around the circumference of the can top. For the safe and temporary collection of biological, medical, contaminated or hazardous waste and laundry in industries like medical, laboratory and pharma.

Prevent spills when transferring flammable solvents, thinners, oils or paint wastes Wide-mouth opening with hinged, stay-open lid. Built-in flame arrester prevents fire intrusion. Self-closing lid in case of fire. Galvanized steel with durable exterior epoxy powder-coat finish. Safely transfer flammable liquids into a 30- or 55-gallon (110- or 200-L) drum using this 2.6-gallon (9.8-L) capacity safety funnel that fits into a 2-in (51-mm) bung. Wide 10-3/4-in (273-mm) mouth handles rapid pouring without spills. A built-in brass flame arrester absorbs and dissipates heat preventing any external ignition source from reaching the drum’s content. Self-closing cover with a fusible link, that melts at 165°F (74°C), automatically shuts in case of a fire. Heavy-duty 18-gauge (1-mm thick) galvanized steel construction with electrostatically applied epoxy powder-coat offers excellent durability and chemical resistance. Lid in closed position reduces vapors and accepts a lock (not included) to prevent unauthorized access. FM-Approved. EPA and OSHA compliant. For the secure transfer of flammable or non-flammable liquids into drums for manufacturing, chemical, oil, gas, and other industries.

Prevent spills when transferring flammable solvents, thinners, oils or paint wastes Wide-mouth opening with hinged, stay-open lid. Built-in flame arrester prevents fire intrusion. Self-closing lid in case of fire. Galvanized steel with durable exterior epoxy powder-coat finish. Safely transfer flammable liquids into a 30- or 55-gallon (110- or 200-L) drum using this 2.6-gallon (9.8-L) capacity safety funnel that fits into a 2-in (51-mm) bung. Wide 10-3/4-in (273-mm) mouth handles rapid pouring without spills. A built-in brass flame arrester absorbs and dissipates heat preventing any external ignition source from reaching the drum’s content. Self-closing cover with a fusible link, that melts at 165°F (74°C), automatically shuts in case of a fire. Heavy-duty 18-gauge (1-mm thick) galvanized steel construction with electrostatically applied epoxy powder-coat offers excellent durability and chemical resistance. Lid in closed position reduces vapors and accepts a lock (not included) to prevent unauthorized access. FM-Approved. EPA and OSHA compliant. For the secure transfer of flammable or non-flammable liquids into drums for manufacturing, chemical, oil, gas, and other industries.

Prevent spills when transferring flammable solvents, thinners, oils or paint wastes Wide-mouth opening with hinged, stay-open lid. Built-in flame arrester prevents fire intrusion. Self-closing lid in case of fire. Galvanized steel with durable exterior epoxy powder-coat finish. Safely transfer flammable liquids into a 30- or 55-gallon (110- or 200-L) drum using this 2.6-gallon (9.8-L) capacity safety funnel that fits into a 2-in (51-mm) bung. Wide 10-3/4-in (273-mm) mouth handles rapid pouring without spills. A built-in brass flame arrester absorbs and dissipates heat preventing any external ignition source from reaching the drum’s content. Self-closing cover with a fusible link, that melts at 165°F (74°C), automatically shuts in case of a fire. Heavy-duty 18-gauge (1-mm thick) galvanized steel construction with electrostatically applied epoxy powder-coat offers excellent durability and chemical resistance. Lid in closed position reduces vapors and accepts a lock (not included) to prevent unauthorized access. FM-Approved. EPA and OSHA compliant. For the secure transfer of flammable or non-flammable liquids into drums for manufacturing, chemical, oil, gas, and other industries.

Automatic pressure relief ensures safe workplace. No more worrying about pressure building up in your drums. These safety drum vents automatically relieve pressure between 3 and 8 psi (30 to 55 kPa). Vents are tested to allow 61 cubic inch (1-L) of water through a 3/8-in (9.5-mm) pipe nipple in less than 6 seconds. Keep the vent in closed position to prevent flammable vapor from escaping. A built-in flame arrester helps absorb and dissipate heat for added safety. Vacuum relief is automatic on vertically installed vents and manual on horizontally installed vents. Drum vents are FM Approved. For protection and avoidance of high-pressure drum failure while dispelling heat using its flame arrestor.

Avoid dangerous tipping or rolling a drum to drain its contents. Unique siphon action of the drum siphon adaptor empties residual solvents from 2 to 3 gal down to only a few remaining ounces. Solid cast brass adaptor withstands heavy use with compatible liquids. Adaptor fits into a 3/4 in drum bung and features an adjustable collar to accommodate bungs in various positions for maximum draining. Attach your choice of 3/4 in safety drum faucet on the opposite end for safe, trouble-free dispensing.

Reduce fire risks by preventing sparks from static electricity. Use these antistatic wires to ground dispensing stations and containers to reduce fire risks from static electricity. Wires come in 3-ft (1-m) and 10-ft (3-m) lengths; for longer reach use several wires with 1/4-in (6-mm) terminal ends. For reducing the risk of fire by preventing sparks from static electricity.

Reduce fire risks by preventing sparks from static electricity. Use these antistatic wires to ground dispensing stations and containers to reduce fire risks from static electricity. Wires come in 3-ft (1-m) and 10-ft (3-m) lengths; for longer reach use several wires with 1/4-in (6-mm) terminal ends. For reducing the risk of fire by preventing sparks from static electricity.

Reduce fire risks by preventing sparks from static electricity. Use these antistatic wires to ground dispensing stations and containers to reduce fire risks from static electricity. Wires come in 3-ft (1-m) and 10-ft (3-m) lengths; for longer reach use several wires with 1/4-in (6-mm) terminal ends. For reducing the risk of fire by preventing sparks from static electricity.

Reduce fire risks by preventing sparks from static electricity. Use these antistatic wires to ground dispensing stations and containers to reduce fire risks from static electricity. Wires come in 3-ft (1-m) and 10-ft (3-m) lengths; for longer reach use several wires with 1/4-in (6-mm) terminal ends. For reducing the risk of fire by preventing sparks from static electricity.

Safe and easy dispensing from horizontal drums. Simply place these faucets on your drum for leakproof dispensing of flammable liquids. Faucets feature an internal flame arrester that prevents flashback of fire into the drum for added safety. Brass construction with a polytetrafluoroethylene (PTFE) seal ensures excellent chemical resistance. Take the worry out of awkward spout position with adjustable models 08910 and 08916. They feature a coupling nut that provides rotation of the spout downward after the faucet is threaded in place. Use Model 08552 for viscous noncorrosive flammables such as adhesives, paint or heavy oils above 2000 SSU (about 30W oil). Faucets are FM Approved. For ensuring safe dispensing of flammable liquids to avoid spills, leaks, and risk of fire hazards.

Safe and easy dispensing from horizontal drums. Simply place these faucets on your drum for leakproof dispensing of flammable liquids. Faucets feature an internal flame arrester that prevents flashback of fire into the drum for added safety. Brass construction with a polytetrafluoroethylene (PTFE) seal ensures excellent chemical resistance. Take the worry out of awkward spout position with adjustable models 08910 and 08916. They feature a coupling nut that provides rotation of the spout downward after the faucet is threaded in place. Use Model 08552 for viscous noncorrosive flammables such as adhesives, paint or heavy oils above 2000 SSU (about 30W oil). Faucets are FM Approved. For ensuring safe dispensing of flammable liquids to avoid spills, leaks, and risk of fire hazards.

Dispose of oil-soaked rags and prevent fires caused by stray sparks or spontaneous combustion. Rags and cloths soaked with solvents, thinners, linseed oil, combustible adhesives and other flammable liquids present a serious fire risk when improperly discarded. Lid opens to no more than 60 degrees and stays closed when not in use, isolating contents from fire sources and limiting oxygen to virtually eliminate the risk of spontaneous combustion. Round construction and elevated base allow circulation of air around can to disperse heat and reduce moisture build-up and rusting. Durable steel construction with a powder-coat finish provides chemical resistance. Lid opens no more than a 60º angle as required by UL. Approved by FM, UL, and TÜV. All cans carry a ten-year warranty. For the safe collection and storage of oil-soaked materials, reducing fire risks and promoting workplace safety and environmental responsibility in industries, such as automotive, manufacturing and construction.

Dispose of oil-soaked rags and prevent fires caused by stray sparks or spontaneous combustion. Rags and cloths soaked with solvents, thinners, linseed oil, combustible adhesives and other flammable liquids present a serious fire risk when improperly discarded. Lid opens to no more than 60 degrees and stays closed when not in use, isolating contents from fire sources and limiting oxygen to virtually eliminate the risk of spontaneous combustion. Round construction and elevated base allow circulation of air around can to disperse heat and reduce moisture build-up and rusting. Durable steel construction with a powder-coat finish provides chemical resistance. Lid opens no more than a 60º angle as required by UL. Approved by FM, UL, and TÜV. All cans carry a ten-year warranty. For the safe collection and storage of oil-soaked materials, reducing fire risks and promoting workplace safety and environmental responsibility in industries, such as automotive, manufacturing and construction.

Dispose of oil-soaked rags and prevent fires caused by stray sparks or spontaneous combustion. Rags and cloths soaked with solvents, thinners, linseed oil, combustible adhesives and other flammable liquids present a serious fire risk when improperly discarded. Lid opens to no more than 60 degrees and stays closed when not in use, isolating contents from fire sources and limiting oxygen to virtually eliminate the risk of spontaneous combustion. Round construction and elevated base allow circulation of air around can to disperse heat and reduce moisture build-up and rusting. Durable steel construction with a powder-coat finish provides chemical resistance. SoundGard™ oily waste cans include a sound muffling pad inside lid to reduce lid-closure noise by nearly 200% over standard models. Ideal for laboratories or anywhere it is desirable to lessen disruptive noise. Lid opens no more than a 60º angle as required by UL. Approved by FM, UL, and TÜV. All cans carry a ten-year warranty. For safely disposing oily rags and prevent fire hazards in industries like automotive and manufacturing.