PIG® MAT424 Heavyweight Absorbent Mat Roll, 150 ft L x 24 in W, 32.4 gal Absorption, Polypropylene
PIG® MAT424 Heavyweight Absorbent Mat Roll, 150 ft L x 24 in W, 32.4 gal Absorption, Polypropylene
-
BrandPIG®
-
UPC036226009855
-
Manufacturer Part NumberMAT424
-
CountryUSA
-
MaterialPolypropylene
-
ColorWhite
-
TypeHeavyweight
-
Width24 in
-
Length150 ft
- Our most cost-effective mat when you only need to absorb oil-based liquids
- Eight layers of 100% polypropylene are thermally bonded to make PIG® mat the strongest mat on the market, won't rip, tear or fray even when saturated
- Exclusive dimple pattern speeds wicking of liquid throughout mat for faster, easier cleanup
- Highly absorbent, fine-fiber construction won't leave behind liquids or fiber residue
- Absorbs oil and fuels, not water
- White color tells you it's only for oils and fuels, draws attention to machine leaks and clearly shows saturation level during spill response
- Floats to clean up spills on water
- Can be wrung out and incinerated after use to reduce waste or for fuels blending
- Flame-resistant material won't burn immediately like cellulose mats, melts when exposed to high heat while on the job
- Rolls are ideal for covering large areas and soaking up leaks and overspray
- Easy-tear perforations let you take only what you need, so you use less mat and save money
- Heavyweight construction is highly durable and absorbent for demanding tasks and large volume cleanups
-
UNSPSC47131901
-
Package Description1/BG
-
Standards/ApprovalsOSHA 29 CFR 1910.22/112.7/122.26
-
Specification Sheet
-
SDS
Recently Viewed
PIG® MAT424 Heavyweight Absorbent Mat Roll, 150 ft L x 24 in W, 32.4 gal Absorption, Polypropylene
PIG® MAT424 Heavyweight Absorbent Mat Roll, 150 ft L x 24 in W, 32.4 gal Absorption, Polypropylene
GP® 2526S Standard Length Socket, 1/2 in, 13/16 in, 8 Points
GP® 2518S Standard Length Socket, 1/2 in, 9/16 in, 8 Points
GP® 2524S Standard Length Socket, 1/2 in, 3/4 in, 8 Points
GP® 3024R Standard Length Socket, 3/4 in, 3/4 in Hex Socket, 6 Points
Nice® 610VBF53 600® Unground Thrust Bearing, 1.031 in Dia Bore, 1.9688 in OD, 5/8 in W, 1404 lb Load
The 600® Series bearing is designed for moderate speeds and medium thrust loads. These bearings utilize a full ball complement. Rings are cold forged from hardenable strip steel and are carefully heat treated. These bearings may be plated or manufactured from stainless steel upon request. The entire assembly is housed in a soft steel band which lends itself to an easy press fit into a housing. The band also serves as a dust shield and helps retain the bearing lubricant. The upper ring is free to rotate in the band and has a close fit in the bore for the shaft. The lower ring is fixed in the band and has a shaft clearance in the bore.
