Pyramex 6-PT HARDHAT RATCHETS PSP HP-161
Pyramex® HP161 SL Series Ratchet Replacement Hard Hat Suspension, 6 Suspension Points, For Use With Cap Style Hard Hats, Specifications Met: ANSI Z89.1-2009, CSA Z94.1-2005
-
BrandPyramex®
-
UPC814992010066
-
Manufacturer Part NumberHP161
-
CountryUSA
-
TypeRatchet Replacement
-
SeriesSL Series
-
Specifications MetANSI Z89.1-2009, CSA Z94.1-2005
-
Suitable For Use WithCap Style Hard Hats
-
UNSPSC46181701
-
Standards/ApprovalsANSI Z89.1-2009|CSA Z94.1-2005
-
Specification Sheet
Recently Viewed
Pyramex® HP161 SL Series Ratchet Replacement Hard Hat Suspension, 6 Suspension Points, For Use With Cap Style Hard Hats, Specifications Met: ANSI Z89.1-2009, CSA Z94.1-2005
HIGH HEAT WHITE ENAMEL SPRAY PAINT-RUS7751 >
2-1/2" RIGID PIPE ELECTRIC STRAP-ELEL6207 >
ECONOMY FLAT WHITE SPRAY PAINT-RUS9004 >
Greenlee® 645-1-3/4 Quick-Change Hole Cutter, 1-3/4 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge, 3/8 in Arbor
Greenlee® 645-1-3/4 Quick-Change Hole Cutter, 1-3/4 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge, 3/8 in Arbor
Browning® 1296367 T35L Automatic Torque Limiter, 5/8 in Finished Bore, 3-1/2 in OD, 1800 in-lb (1-Spring)/3000 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
