MORSE C/Tool 5/16" 2-FL DE BALL ENDMILLS MCT 43164
MORSE® 43164 1889 Ball Nose Double End Regular Length End Mill, 5/16 in Dia Cutter, 9/16 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 3-1/8 in OAL, Bright
-
BrandMORSE®
-
UPC686125431648
-
Manufacturer Part Number43164
-
CountryUSA
-
FinishBright
-
MaterialHSS
-
Flute TypeSpiral
-
TypeBall Nose Double End Regular Length
-
Helix Angle30 deg
-
Series1889
-
Cutter Diameter5/16 in
-
Shank Diameter3/8 in
-
Number of Flutes2
-
Cutting DirectionRight Hand
-
Shank TypeRound/Weldon Flat
-
Length of Cut9/16 in
-
Overall Length3-1/8 in
- 2-flute end mills provide increased chip capacity and are recommended for milling slots, keyways and pockets
- Allows for plunge cutting like a drill into solid materia
-
UNSPSC23242511
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
Recently Viewed
MORSE® 43164 1889 Ball Nose Double End Regular Length End Mill, 5/16 in Dia Cutter, 9/16 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 3-1/8 in OAL, Bright
QO and QOB one, two and three pole thermal magnetic circuit breakers provide overcurrent protection and switching on ac and dc systems. These circuit breakers have an over center, trip free toggle mechanism with quick make, quick break action and positive handle indication. They also have VisiTrip trip indication, which provides a visual indication that the circuit breaker has tripped and interrupted the circuit. A full line of features and factory installed accessories are also available such as shunt trips, auxiliary switches and alarm switches. This 2 pole QO circuit breaker is rated at 45A at 120/240VAC. This unit provides 10kA breaking capacity and bolt on mounting. QO circuit breakers are UL Listed under UL File E84967 and are CSA Certified under CSA Master Contract 153555.
BOX OF 50 SURGICAL MASK3-LAYER PLEATED SURGICAL MASKS-OFISURGICALMASK>
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
Greenlee® 645-1-3/4 Quick-Change Hole Cutter, 1-3/4 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge, 3/8 in Arbor
Greenlee® 645-1-3/4 Quick-Change Hole Cutter, 1-3/4 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge, 3/8 in Arbor
RIDGID® 42490 6U Die Head Rack, For Use With: All Machine Die Head
RIDGID® 42490 6U Die Head Rack, For Use With: All Machine Die Head
