MCR Safety MUSTANG MIG/TIG WELDING GLOVE GLV 4950-XL
Only the finest top grain leather go into our mig/tig welding options. Sewn with Dupont™ Kevlar® thread to resist sparks and sharp metals which can unravel most gloves, you will find these gloves a great long term value. Low heat welding often requires optimal dexterity which affords great attention to detail. You'll find features on the 4950 include premium grade cream grain cow leather, 4.5" russet split gauntlet cuff and wing thumb.
-
BrandMCR Safety
-
UPC045143495047
-
Manufacturer Part Number4950XL
-
CountryUSA
-
MaterialLeather
-
ResistsSharp Metal and Spark
-
ColorBeige
-
TypePremium Grade
-
Series4950
-
Cuff StyleGauntlet
-
SizeXL
-
Length12.63 in
-
StyleStandard Finger/Wing Thumb
-
Palm MaterialGrain Cow Skin Leather
-
LiningUnlined
- Sewn with strong, heat-resistantDuPont Kevlar thread
- Comfortable wing thumb design
- Wing Thumb
| Competitor Name | Cross-Reference Number |
|---|---|
| MSC | 87984605 |
| Fastenal | 0852234 |
| Grainger | 36J030;26K912 |
-
UNSPSC46181540
-
Package Description1/DZ
-
Specification Sheet
Recently Viewed
Only the finest top grain leather go into our mig/tig welding options. Sewn with Dupont™ Kevlar® thread to resist sparks and sharp metals which can unravel most gloves, you will find these gloves a great long term value. Low heat welding often requires optimal dexterity which affords great attention to detail. You'll find features on the 4950 include premium grade cream grain cow leather, 4.5" russet split gauntlet cuff and wing thumb.
Dixon® FM2025F Reducing Hex Nipple, 2 x 2-1/2 in Nominal, 1-15/32 in L, Brass, FNPT x Male NH NST End Style, Domestic
Dixon® FM2025F Reducing Hex Nipple, 2 x 2-1/2 in Nominal, 1-15/32 in L, Brass, FNPT x Male NH NST End Style, Domestic
HCI Preferred Supplier 28106L Light Pattern Hex Bushing, 1/2 x 1/4 in Nominal, MNPT x FNPT End Style, Brass
HCI Preferred Supplier 28106L Light Pattern Hex Bushing, 1/2 x 1/4 in Nominal, MNPT x FNPT End Style, Brass
Gates® Power Transmission PowerGrip® 1700H150 Heavy Timing Belt, 1-1/2 in W, 170 in OAL, 1/2 in Pitch, 340 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
Browning® Classical Gripbelt® 1027911 BK Series Type 2 Single Groove Sheave, Finished Bore, 5/8 in Dia Bore, 2.7 in OD, 2.2 in (A)/2.7 in (B) Dia Pitch, 13/16 in W Face
Browning® Classical Gripbelt® 1027911 BK Series Type 2 Single Groove Sheave, Finished Bore, 5/8 in Dia Bore, 2.7 in OD, 2.2 in (A)/2.7 in (B) Dia Pitch, 13/16 in W Face
HCI Preferred Supplier 36184 Ball Check Grease Fitting, M10x1 Thread, 18 mm OAL, Steel
HCI Preferred Supplier 36184 Ball Check Grease Fitting, M10x1 Thread, 18 mm OAL, Steel
