Gates® Power Transmission PowerGrip® 1700H150 Heavy Timing Belt, 1-1/2 in W, 170 in OAL, 1/2 in Pitch, 340 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
-
BrandGates® Power Transmission
-
UPC72053566536
-
Manufacturer Part Number1700H150
-
CountryUSA|Canada
-
Pitch1/2 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeHeavy
-
Minimum Pulley Diameter3.13 in
-
Width1-1/2 in
-
Series9257
-
Number of Teeth340
-
Overall Length170 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- The trapezoidal tooth profile makes this belt well suited for use in positioning applications
-
Alternative Part Number92573324
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Gates® Power Transmission PowerGrip® 1700H150 Heavy Timing Belt, 1-1/2 in W, 170 in OAL, 1/2 in Pitch, 340 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
Browning® Classical Gripbelt® 1027911 BK Series Type 2 Single Groove Sheave, Finished Bore, 5/8 in Dia Bore, 2.7 in OD, 2.2 in (A)/2.7 in (B) Dia Pitch, 13/16 in W Face
Browning® Classical Gripbelt® 1027911 BK Series Type 2 Single Groove Sheave, Finished Bore, 5/8 in Dia Bore, 2.7 in OD, 2.2 in (A)/2.7 in (B) Dia Pitch, 13/16 in W Face
HCI Preferred Supplier 36184 Ball Check Grease Fitting, M10x1 Thread, 18 mm OAL, Steel
HCI Preferred Supplier 36184 Ball Check Grease Fitting, M10x1 Thread, 18 mm OAL, Steel
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
Browning® Classical Gripbelt® 1026368 AK Series Type 2 Single Groove Sheave, Finished Bore, 3/4 in Dia Bore, 3-3/4 in OD, 3.7 in (A)/3.16 in (3L) Dia Pitch, 3/4 in W Face
Browning® Classical Gripbelt® 1026368 AK Series Type 2 Single Groove Sheave, Finished Bore, 3/4 in Dia Bore, 3-3/4 in OD, 3.7 in (A)/3.16 in (3L) Dia Pitch, 3/4 in W Face
Gates® Power Transmission PowerGrip® 450XL037 Extra Light Timing Belt, 3/8 in W, 45 in OAL, 0.2 in Pitch, 225 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
