MCR Safety NINJA ICE NYLON/PVC-DIP GLOVES GLV N-9690-FCM-M
Mcr safety Ninja® gloves are engineered to provide the highest level of innovation. Each of the offerings in the Ninja® series include a unique shell and polymer combination incorporating the latest in hand protection technology. Our Ninja® glove line offers the greatest assortment of dexterity, sense of touch, and protection. The Ninja® ice fully coated gloves features a 15-ga black nylon shell with a 7-ga acrylic terry interior liner. Black HPT fully coated glove.
-
BrandMCR Safety
-
UPC045143969067
-
Manufacturer Part NumberN9690FCM
-
CountryUSA
-
Material15 ga Acrylic/Nylon
-
CoatingHPT™
-
Coating CoverageFull Coverage
-
ResistsAbrasion, Cut, Puncture and Tear
-
ColorBlack
-
TypeDipped Insulated
-
SeriesNinja® Ice N9690FC
-
Cuff StyleKnit Wrist
-
SizeM
-
Length9.843 in
-
Palm MaterialHPT™
-
LiningAcrylic
-
StyleGrip
- Acrylic terry liner for insulation/warmth
- Allows air to flow through keeping hands dry
- Coating remains soft in temperatures as low as -4 F
- Encapsulated air molecules provide a cushioning effect to minimize impact
- Fully coated for maximum protection
- The porous HPT coating repels liquid for an unprecedent firm grip in wet or dry conditions
- Treated with ActiFresh to help control bacteria and odor
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 13V970 |
| MSC | 81614679 |
| Fastenal | 1029613 |
-
UNSPSC46181537
-
Package Description1/DZ
-
Standards/ApprovalsANSI Cut A3|ANSI Contact Heat Level 2|ANSI Abrasion 3|ANSI Puncture 2|EN 388 3232|PROP65: Cancer and Reproductive Harm - www.P65Warnings.ca.gov/product
-
Specification Sheet
Recently Viewed
Mcr safety Ninja® gloves are engineered to provide the highest level of innovation. Each of the offerings in the Ninja® series include a unique shell and polymer combination incorporating the latest in hand protection technology. Our Ninja® glove line offers the greatest assortment of dexterity, sense of touch, and protection. The Ninja® ice fully coated gloves features a 15-ga black nylon shell with a 7-ga acrylic terry interior liner. Black HPT fully coated glove.
From wranglin' to buildin', these gloves are tough for the job! cowhide is the most commonly used leather due to availability. Characteristics include a good balance between abrasion-resistance, dexterity, durability and comfort.
7/8" -ID NU-LOC INSERT BEARING-FYHNC20514 >
Gates® Power Transmission Super HC® 8V1400 Banded Heavy Duty V-Belt, 8V Section, 1 in W Top, 140 in L Outside, 7/8 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
Schneider Electric Square D™ TeSys™ D LC1D12BD Direct On-Line Standard IEC Contactor, 690 V AC, 24/300 V DC V Coil, 12/25 A, 3NO Contact, 3 Poles
TeSys Deca contactor, 3 poles (3NO), for motor control applications up to 12A/690V AC-3/3e (5.5kW@400V). They can be used to create motor starters for almost any type of application. It provides a 24V DC coil with transient suppressor module, 1NO+1NC built-in auxiliary contacts (NC mirror certified), connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (45mm width), DIN-rail mounting or screw fixing. Contactor is rated for 3HP at 200-208VAC, 3HP at 240VAC, 7.5HP at 480VAC and 10HP at 600VAC three phase. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine). When used with a 480VAC up to 35A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 30A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.03 inches tall, 1.77 inches wide and 3.74 inches deep. It weighs 1.07 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards.
The Power-Stud® anchor is a one piece fully threaded, wedge style anchor available in carbon steel and stainless steel. Threaded, rod hanger and tie wire versions are designed for use in solid concrete. The drill bit diameter needed for proper installation is the same as the anchor diameter.
