Pyramex WAVERTON FOREST/GRAY-LENS PSP VGSB-1126-DB
VentureGear™ VGSB1126DB Safety Eyewear, Anti-Scratch, Forest Gray Lens, Black, Polycarbonate Frame, ANSI Z87.1
-
BrandVentureGear™
-
UPC811907026853
-
Manufacturer Part NumberVGSB1126DB
-
CountryUSA
-
Temple StyleDual-Injected/Straight Back
-
Frame ColorBlack
-
Frame MaterialPolycarbonate
-
UV ProtectionYes %
-
Specifications MetANSI Z87.1
-
Lens CoatingAnti-Scratch
-
Lens ColorForest Gray
-
Lens MaterialPolycarbonate
-
Bridge Size17 mm
- Flexible rubber nosepiece
- Dual-injected straight back temples
- Scratch-resistant polycarbonate lens provides 99% UVA/B/C protection
- 99
-
UNSPSC46181802
-
Standards/ApprovalsANSI Z87.1
-
Specification Sheet
Recently Viewed
VentureGear™ VGSB1126DB Safety Eyewear, Anti-Scratch, Forest Gray Lens, Black, Polycarbonate Frame, ANSI Z87.1
IDEAL® 30-072 72B® Flame-Retardant Wire Connector, Positive Grip Shell, Fixed/Square Wire Spring, 22 to 14 AWG Wire Solid/Stranded Copper Wire, Polypropylene
The IDEAL Wire-Nut Wire Connector set new standards for innovation, quality and convenience when it was first introduced in 1928. As the first screw-on wire connector in America, it literally set the industry standard for years to come.With a fixed, square-wire spring and a positive grip shell, the Wire-Nut is perfect to twist-on with fingers for a secure connection that will last. The refined wire range makes it the best choice for fine stranded wire applications. The Wire-Nut also features a tough, flame-retardant thermoplastic shell that withstands environmental extremes and is reusable for easy circuit changes and addition.With five color-coded models available, Wire-Nut Wire Connectors will handle any job from as small as #22 gauge wire up to #6 gauge wire.Additionally, Models 71B, 72B, and 73B, in both color or black high-temp, are the only twist-on wire connectors rated for use in Air Handling Spaces. These connectors can be used on Class 2 or low-voltage connections inside plenums, ducts, and other environmental air handling spaces without the need for a box.
Milwaukee® 48-22-6105 Lightweight Mini Flush Cutter, 1/2 in Nominal, Up to 18 AWG Shears THK Max Wire, 1/4 in Jaw Steel Jaw, 8 in OAL, Flush Cut
The Milwaukee mini flush flush cutters produce a flat, straight cut when cutting through thinner wires and cable ties. The slim profile allows for better access into tight spaces. The cushion grips and spring loaded design reduce user fatigue.
ISOSTATIC™ Oilube® 401126 Round Bore Sleeve Bearing, 1/2 in Dia Bore, 5/8 in OD, 7/8 in W
ISOSTATIC™ Oilube® 401126 Round Bore Sleeve Bearing, 1/2 in Dia Bore, 5/8 in OD, 7/8 in W
Sealmaster® 550096 RCI Mounted Tapered Roller Insert Only, 1-1/4 in Dia Bore, 2-1/2 in OD, 2.78 in W
The M18™ FUEL™ barrel grip jig saw combines power, blade speed and precision, to provide the highest quality cuts in a wide variety of materials. The M18™ FUEL™ D-handle jig saw leverages the POWERSTATE brushless motor and REDLINK Plus™ intelligence to provide higher blade speed than corded jig saws at 3500 strokes per minute for clean controlled cuts with minimized chipping or bucking. Leveraging the M18™ REDLITHIUM™ XC5.0 battery the M18™ FUEL™ D-handle jig saw provides up to 105 linear feet of cutting in 3/4 in. laminated particle board, delivering all day productivity with less trips to the charger. The saw features tool-less blade change, tool free bevel adjust with pin detent at 0°; 15°; 30°; and 45° as well as an LED light and on/off blower to keep the cut line visible while cutting.
