Pyramex ZTEK COFFEE SAFETY GLASSES PSP S-2515-S
Pyramex® S2515S Lightweight Safety Eyewear, Anti-Scratch, Coffee Lens, Plastic Frame, Polycarbonate Lens, ANSI Z87.1, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
-
BrandPyramex®
-
UPC814992004430
-
Manufacturer Part NumberS2515S
-
CountryUSA
-
Temple StyleNon-Slip Rubber/Soft
-
Frame ColorCoffee
-
Frame MaterialPlastic
-
TypeLightweight
-
UV ProtectionYes %
-
Specifications MetANSI Z87.1, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
-
Lens CoatingAnti-Scratch
-
Lens ColorCoffee
-
Lens MaterialPolycarbonate
-
Bridge Size13 mm
- Integrated nosepieces
- Soft, non-slip rubber temple tips provide non-binding fit
- Economical wraparound single lens provides full panoramic view
- Scratch-resistant polycarbonate lens provides 99% UVA/B/C protection
- Polycarbonate hinge, nosepiece and side shields
- 99
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 29XT76 |
-
UNSPSC46181802
-
Standards/ApprovalsANSI Z87.1+|CE EN166|CSA Z94.3
-
Specification Sheet
Recently Viewed
Pyramex® S2515S Lightweight Safety Eyewear, Anti-Scratch, Coffee Lens, Plastic Frame, Polycarbonate Lens, ANSI Z87.1, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
2-VP-065-1-3/8 2-grv Variable Pitch Sheaves
2-GRV VARIABLE PITCH SHEAVES -IDC2VP06513/8 >
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
1-VL-033-3/4 1-grv Variable Pitch Sheaves
1-GRV VARIABLE PITCH SHEAVES -1VL0443/4 >
HCI Preferred Supplier 20268 Tube Connector, 1/8 in, Poly-Flo® Flareless x Male NPTF, CA360 Brass
HCI Preferred Supplier 20268 Tube Connector, 1/8 in, Poly-Flo® Flareless x Male NPTF, CA360 Brass
Dodge® 117158 Stock Bore Taper Lock Bushing, 3/4 in Dia Bore, 2-1/4 in Dia Barrel, 1 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
