Precision Brand® 16A9 Shim Stock, 1008-1010 Full Hard Steel, 100 in Roll L x 6 in W x 0.009 in THK
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
-
BrandPrecision Brand®
-
UPC698158164158
-
Manufacturer Part Number16A9
-
CountryUSA|Canada
-
Thickness0.009 in
-
Material1008-1010 Full Hard Steel
-
Width6 in
-
Length100 in Roll
- Material can be punched or sheared with minimum burring and distortion
- It is especially useful for pilot production runs where material accuracy and economy are important
- All Precision Brand shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 3L456 |
-
UNSPSC31231402
-
Package Description1/PKG
-
Catalog
Recently Viewed
Precision Brand® 16A9 Shim Stock, 1008-1010 Full Hard Steel, 100 in Roll L x 6 in W x 0.009 in THK
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
1-GAL OIL ROYAL BLUE ENAMEL PAINT-BLP3037GAL >
Dodge® 131809 207 Normal Duty Pillow Block Ball Bearing Unit, 1-1/4 in Dia Bore, 4.68 to 5.44 in L Bolt Center-to-Center, 1.88 in Base to Bore Centerline, 6-1/2 in OAL x 3-3/4 in OAH
For more than 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience led to design of the optimum mounted ball bearings. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value.
Gates® Power Transmission Polyflex® 7M1120 Light Duty V-Belt, 7M Section, 9/32 in W Top, 44.09 in L Outside, 7/32 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
Dodge® 131839 207 Normal Duty Pillow Block Ball Bearing Unit, 1-3/8 in Dia Bore, 4.68 to 5.44 in L Bolt Center-to-Center, 1.81 in Base to Bore Centerline, 6-1/2 in OAL x 3.69 in OAH
For more than 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience led to design of the optimum mounted ball bearings. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value. The Dodge® eccentric ball bearing is manufactured at the state-of-the-art Dodge® bearing plant in Rogersville, Tennessee - an ISO 9002 certified plant.
HCI Preferred Supplier 28151 Long Pipe Nipple, 3/8 in Nominal, 3 in L, Brass, NPTF End Style
HCI Preferred Supplier 28151 Long Pipe Nipple, 3/8 in Nominal, 3 in L, Brass, NPTF End Style
