Gates® Power Transmission Hi-Power® II C185 Banded Heavy Duty V-Belt, C Section, 7/8 in W Top, 189 in L Outside, 17/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
-
BrandGates® Power Transmission
-
UPC72053293371
-
Manufacturer Part NumberC185
-
CountryUSA|Canada
-
Thickness17/32 in
-
MaterialEPDM
-
Top Width7/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter7.958 in
-
Section SizeC
-
Series9004
-
Number of Ribs1
-
Outside Length189 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
- Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather and aging
-
Alternative Part Number90042185
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission Hi-Power® II C185 Banded Heavy Duty V-Belt, C Section, 7/8 in W Top, 189 in L Outside, 17/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
BANJO V-100-FP 4 BOLT BALL VALVE, FULL PORT, 1" FEMALE NPT X 1" FEMALE NPT. OPENING THRU BALL: 1", 300 PSI
FKM (VITON TYPE) SEALS. PRECISION MOLDED POLYPROPYLENE IS REINFORCED WITH FIBERGLASS FOR ADDITIONAL STRENGTH. SELF-ALIGNING BALL MOVES FREELY AGAINST THE PTFE SEATS FOR SMOOTH OPERATION. THE VALVE OPENS AND CLOSES WITH VERY LITTLE PRESSURE ON THE HANDLE. THE BALL IS DIAMOND TURNED, AFTER MOLDING, TO MAKE IT SPHERICALLY PERFECT, WHICH PROVIDES PRECISE CONTACT BETWEEN BALL AND SEATS. SELF-LUBRICATING STEM BUSHINGS. STAINLESS STEEL BOLTS
-BAJV100FP >
Milwaukee® M100B-21L M12™ Cordless Jacket Kit, L, Black, Polyester, 44 in Chest, Resists: Water
The MILWAUKEE® M12™ Heated TOUGHSHELL™ Jacket delivers HEAT BUILT TO OUTLAST. Powered by Milwaukee’s NEW HEXON HEAT TECHNOLOGY™, this jacket STAYS WARMER FOR LONGER in all temperatures, delivers the FASTEST HEAT UP TIME, and offers GREATER HEAT COVERAGE throughout the garment. Whether facing freezing outdoor temperatures or navigating spaces with minimal heat indoors, this jacket adapts to its environment to deliver effective heat in any condition. 3X more insulation combined with HEXON HEAT TECHNOLOGY™ maximizes heat retention and enhances comfort. The hidden battery pass-thru pocket allows for front or back battery placement, increasing versatility depending on the situation. With its durable 100% stretch polyester fabric and DWR finish, this MILWAUKEE® jacket is a go-to for shielding against the elements. Milwaukee® Heated Gear is developed in collaboration with feedback from users across the trades through continuous jobsite research.
Gates® Power Transmission PowerGrip® HTD® 240-3M-15 Synchronous Belt, 15 mm W, 240 mm OAL, 3 mm Pitch, 80 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
Gates® Power Transmission Hi-Power® II PowerBand® 3/B148 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 151 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
TCM78182TB>
