Little Giant® 526003 NK-1 Small Direct Drive Oil Filled Submersible Pump, 210 gph Flow Rate, 1/4 in MNPT Outlet, 1/150 hp, Nylon
Little Giant® 526003 NK-1 Small Direct Drive Oil Filled Submersible Pump, 210 gph Flow Rate, 1/4 in MNPT Outlet, 1/150 hp, Nylon
-
BrandLittleGIANT®
-
UPC010121260030
-
Manufacturer Part Number526003
-
CountryUSA|Canada
-
Temperature Rating120 deg F
-
MaterialNylon
-
Flow Rate210 gph
-
Maximum Pressure4.4 psi
-
Frequency Rating60 Hz
-
TypeSmall Direct Drive Oil Filled
-
Voltage Rating115 V
-
Amperage Rating1.1 A
-
SeriesNK-1
-
Horsepower1/150 hp
-
Impeller TypeNylon
-
Dimensions5 in L x 5 in W x 4.6 in H
-
Outlet Size1/4 in MNPT
- 1/150 hp oil filled motor
- Nylon housing, cover and volute
- Fluoroelastomer (FKM) shaft seal
- Polyethylene screen
- Thermal overload protection
-
Alternative Part NumberNK-1
-
UNSPSC40151500
-
Package Description1/PK
Recently Viewed
Little Giant® 526003 NK-1 Small Direct Drive Oil Filled Submersible Pump, 210 gph Flow Rate, 1/4 in MNPT Outlet, 1/150 hp, Nylon
Little Giant® 526003 NK-1 Small Direct Drive Oil Filled Submersible Pump, 210 gph Flow Rate, 1/4 in MNPT Outlet, 1/150 hp, Nylon
ALAN 14-THHN YELLOW STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
-ALE14THHNYEL >
3/8" GALVANIZED TEE-JPW3/8GT>
3/4" X 1/2" X 1/2" GALVANIZED TEE-JPW3/4X1/2X1/2GT >
24" SHELVES-HLW51293624>
Browning® 1223411 Minimum Plain Bore Type C1 Change Gear, 12 Diametral Pitch, 14.5 deg Pressure Angle, 3/4 in W Face, 28 Teeth, 2.333 in Dia Pitch, 1 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
