40-B-TL-48 48 Tooth Sprockets For #40
48 TOOTH SPROCKETS FOR #40 CHAIN-IDC40BTL48 >
Recently Viewed
48 TOOTH SPROCKETS FOR #40 CHAIN-IDC40BTL48 >
HCI Preferred Supplier 80603 Pressure Gauge, 0 to 60 psi Pressure, 1/8 in Connection, 1-1/2 in Dia Dial, +/-1.5 % Accuracy
HCI Preferred Supplier 80603 Pressure Gauge, 0 to 60 psi Pressure, 1/8 in Connection, 1-1/2 in Dia Dial, +/-1.5 % Accuracy
Browning® PC9009 Taper Bore Bushing Kit, 1-7/16 in ID x 1-15/16 in OD Dia Bushing, For Use With TorqTaper® Plus Size 115SMTP Shaft Mount Speed Reducer, Ductile Iron
Many accessories accompany the Browning® shaft mount reducer. These accessories are designed to provide installation flexibility, improved performance and safety.
Dichtomatik 67192429 O-Ring, 35 mm ID x 41 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
EATON CHF230 Type CHF Standard Circuit Breaker With Mechanical Trip Flag, 120/240 V AC, 30 A, 10 kA Interrupt, 2 Poles
Eaton's residential CH circuit breakers provide premium overload protection. The Type CH circuit breakers trip to the OFF position, eliminating nuisance callbacks. The CHF family also includes a trip flag to differentiate between a trip and the breaker being turned off. The thermal-magnetic trip curve avoids nuisance tripping on mild overloads while reacting almost instantaneously to severe short-circuit conditions. Multiple breakers have an internal common trip connection to operate all poles simultaneously. Handles are marked with ON-OFF indication and ampere rating of the breaker.
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
