HCI Preferred Supplier 80603 Pressure Gauge, 0 to 60 psi Pressure, 1/8 in Connection, 1-1/2 in Dia Dial, +/-1.5 % Accuracy
HCI Preferred Supplier 80603 Pressure Gauge, 0 to 60 psi Pressure, 1/8 in Connection, 1-1/2 in Dia Dial, +/-1.5 % Accuracy
-
BrandGeneric
-
Manufacturer Part Number80603
-
CountryUSA
-
Temperature Rating-104 to 158 deg F
-
Material304 Stainless Steel
-
Pressure Range0 to 60 psi
-
Connection Size1/8 in
-
Mounting TypeLower
-
Accuracy+/-1.5 %
-
Dial Diameter1-1/2 in
-
Standards/ApprovalsPROP65
-
Warranty1 Year
Recently Viewed
HCI Preferred Supplier 80603 Pressure Gauge, 0 to 60 psi Pressure, 1/8 in Connection, 1-1/2 in Dia Dial, +/-1.5 % Accuracy
HCI Preferred Supplier 80603 Pressure Gauge, 0 to 60 psi Pressure, 1/8 in Connection, 1-1/2 in Dia Dial, +/-1.5 % Accuracy
Browning® 1076736 QD Bushing, 1-7/16 in Dia Bore, 2-3/16 in Dia Barrel, 3-1/8 in Dia Flange, 1.83 in OAL, Ductile Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
24" COTTON LOOPED END DUST MOP HEAD - MAG5224>
483052 DO IT BEST/TELEMECHANIQUE SENSORS PUMPTROL 40-60PSI DIAPHRAGM ACTUATED 2 POLE PRESSURE SWITCH
PUMPS UP TO 2 HP AT 120 VAC. USED DIRECTLY OR THROUGH A MAGNETIC STARTER. FORCE TO TRIP 9 OZ UP, 8 OZ. DOWN. -22F TO 250 F.
-JWH483052>
1-1/4" -FEMALE PIPE THREAD 90 DEGREE GALVANIZED ELBOW-FIT11/4GE >
The Precision Flush Cutter offers added comfort for cutting applications that demand precision and control. Improved knife design on these pliers snips soft wire up to 16 AWG for a flat, flush cut. The ultra slim profile increases access in confined areas. Grips designed for greater control while the steel return spring adds comfort when making repetitive cuts. The blades are heat treated for long life. This is your go-to tool when you want precision and control when cutting small wire, zip ties and other fine material.
