H-4028X7/8 28 Tooth Sprockets For #40
28 TOOTH SPROCKETS FOR #40 CHAIN-BRWH4028X7/8 >
Recently Viewed
28 TOOTH SPROCKETS FOR #40 CHAIN-BRWH4028X7/8 >
GEARWRENCH® 9613N Open End Regular Length Reversible Combination Wrench, 13 mm Wrench, 12 Points, 15 deg Offset, 6.902 in OAL, High Alloy Steel, Polished Chrome
The reversible ratcheting combination wrenches from GEARWRENCH® are a staple for every tool box. The flush-mounted reversing lever allows the user to switch motion left to right without needing to remove the wrench from the fastener increasing productivity. The 15 deg offset on the ratcheting box end allows for greater knuckle clearance and safer access to the fasteners. The ratcheting box end is designed to need as little as 5 deg to move fasteners versus 30 deg for standard wrenches and features off-corner loading for a better grip on the fastener and reduces fastener rounding. The wrenches are made from strong alloy steel with a bright, full polish chrome finish.
RIDGID® 32840 Heavy Duty Pipe Cutter, 2 to 4 in Nominal, Ergonomic Grip Handle
RIDGID® 32840, 4-S Heavy Duty Pipe Cutter, 2 to 4 in, Ergonomic Handle
5/32" X 5" DIAMOND POINT CHISEL
Browning® 1045459 VP Series Type 2 Variable Pitch Sheave, 1-1/8 in Finished Bore, 4-3/4 in OD, 1 Groove, 3.3 to 4.1 in (3L)/3.6 to 4.6 in (A/4L)/3.8 to 4.8 in (B/5L) Dia Pitch, 3/4 to 1-1/8 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
5/16"-MALE ORB X 1/4"-MALE NPTF HYDRAULIC ADAPTER - DAY640154 >
