OIL SEALS
1.125" X 1.624X.250" RADIAL SHAFT OIL SEAL. DOUBLE LIP OIL SEAL
-CHI11124 >
1.125" X 1.624X.250" RADIAL SHAFT SEAL, DOUBLE LIP -CHI11134 >
1.125" X 1.752X.250" RADIAL SHAFT SEAL SINGLE LIP-CHI11138 >
1.125" X 1.750" X .250" RADIAL SHAFT SEAL. SINGLE LIP GREASE SEAL-CHI11150 >
1.125" X 1.781" X .250" RADIAL SHAFT SEAL. SINGLE LIP GREASE SEAL, SOLID-CHI11161 >
1.125" X 1.781" X .469" RADIAL SHAFT SEAL. SINGLE LIP GREASE SOLID SEAL-CHI11164 >
1.125" X 1.828" X .250" RADIAL SHAFT SEAL. SINGLE LIP GREASE SOLID SEAL-CHI11170 >
1.125" X 1.828" X .250" RADIAL SHAFT SEAL. DOUBLE LIP SOLID OIL SEAL-CHI11171 >
1.125" X 2.000" X .250" RADIAL SHAFT SEAL. SINGLE LIP SOLID SEAL-CHI11340 >
1.125" X 1.874X.250" RADIAL SHAFT SEAL. DOUBLE LIP SOLID SOIL SEAL-CHI11223 >
1.125" X 1.938" X .343 RADIAL SHAFT SEAL. SINGLE LIP GREASE SEAL
-CHI11269 >
1.125" X 2.000" X .375" RADIAL SHAFT SEAL, DOUBLE LIP SOLID OIL SEAL-CHI11343 >
1.125" X 2.047" X .313" RADIAL SHAFT SEAL, DOUBLE LIP SOLID SEAL-CHI11353 >
1.125" X 2.062X.313" RADIAL SHAFT SEAL. SINGLE LIP SOLID OIL SEAL-CHI11366 >
1.125" X 2.125" X .313" RADIAL SHAFT SEAL. SINGLE LIP OIL SEAL, SOLID-CHI11372 >
1.125" X 2.441" X .250" RADIAL SHAFT SEAL. SINGLE LIP OIL SEAL-SOLID -CHI11392 >
1.156X1.874X.250" RADIAL SHAFT SEAL SINGLE LIP, SOLID-CHI11524 >
1.156X2.000" X .250" RADIAL SHAFT SEAL. DOUBLE LIP SOLID OIL SEAL-CHI11545 >
1.175" X 2.031" X .500" OIL SEAL-CHI11553 >
1.181" X 1.644X.276 OIL SEAL-CHI11610 >
1.181" X 1.850" X .276 SMALL BORE SEAL-CHI11623 >
1.181" X 1.969" X .276 -CHI11631 >
1.181" X 1.969" X .315" OIL SEAL-CHI11635 >
1.181" X 2.165" X .276 OIL SEAL-CHI11652 >
Recently Viewed
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
DOUBLE SEALED BALL BEARING WITH SNAP RING-NTN6212LLNR >
The MILWAUKEE® M18 FUEL™ 1/2" Mid-Torque Impact Wrench w/ Friction Ring delivers the best power to weight ratio, most access in tight spaces, and faster removal speed. It provides 650 ft-lbs of nut-busting torque and only weighs 5.1 lbs, making it extremely versatile, capable of performing a wide variety of applications. Its POWERSTATE™ Brushless Motor generates the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. This battery-powered impact wrench is the most compact in its class, allowing access to stubborn fasteners in spaces where larger impact wrenches can't fit without needing to disassemble components to reach bolts. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 35 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence ensures maximum performance, protecting the tool against overloads, over-heating, and over-discharge. This kit includes (1) M18 FUEL™ 1/2" Mid-Torque Impact Wrench w/ Friction Ring, (2) M18™ REDLITHIUM™ 5.0Ah Batteries, (1) M12™/M18™ Charger, and a Contractor Bag.
TAPERED ROLLER BEARING CONES -NTNJM714249 >
Stanley Proto J4-HDL C-Clamp Extra Heavy-Duty 0-4-5/8-Inch-PROJ4HDL
TPR-ID SPHERICAL ROLLER BEARING-NTN22211K >
