Stanley Proto J4-HDL C-Clamp Extra Heavy-Duty 0-4-5/8-Inch
Stanley Proto J4-HDL C-Clamp Extra Heavy-Duty 0-4-5/8-Inch-PROJ4HDL
Recently Viewed
Stanley Proto J4-HDL C-Clamp Extra Heavy-Duty 0-4-5/8-Inch-PROJ4HDL
Browning® 767827 VF2E 100 Non-Expansion Intermediate Duty Ball Bearing Unit, 1/2 in Dia Bore, 2-1/2 in L Bolt Center-to-Center, 2-Bolt Flange Mount, 3-3/16 in OAL/Dia
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
INSSXR-100 Dodge® 131908 205 Normal Duty Ball Insert Bearing, 1 in Dia Bore, 1.5748 in OD, 1.62 in W, 3146 lb Dynamic/1769 lb Static Load
Dodge® 131908 205 Normal Duty Ball Insert Bearing, 1 in Dia Bore, 1.5748 in OD, 1.62 in W, 3146 lb Dynamic/1769 lb Static Load
1"-FPT SCH-80 BLACK COUPLING
Dichtomatik N70435 O-Ring, 435 Dash Number, 5.725 in ID x 6.275 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
12-TOOTH #35 CHAIN SPROCKETS IDC 35-B-12-F-5/8
12 TOOTH SPROCKETS FOR #35 CHAIN
