14767 Oil Seals-1.496" X 2.913" X .433"
OIL SEALS-1.496" X 2.913" X .433"-IMS14767>
Recently Viewed
OIL SEALS-1.496" X 2.913" X .433"-IMS14767>
Jacobs® 3605 L-Handle Chuck Key, 1/4 in Dia Pilot, Key Number: KGA, For Use With 1/4 in and 3/8 in Multi-Craft® Chucks, Soft Steel
Jacobs® 3605 L-Handle Chuck Key, 1/4 in Dia Pilot, Key Number: KGA, For Use With 1/4 in and 3/8 in Multi-Craft® Chucks, Soft Steel
3/4"-MPT X 1/8"-FPT BLACK BUSHINGS
Alemite® 6320-3 High Pressure Control Valve, 7500 psi Pressure Rating, 1/4 in NPTF x 1/8 in NPTF Thread Connection, Grease Media, Steel
Alemite® 6320-3 High Pressure Control Valve, 7500 psi Pressure Rating, 1/4 in NPTF x 1/8 in NPTF Thread Connection, Grease Media, Steel
Where it becomes impractical to meet the shaft raceway design requirements (hardness, case depth, surface finish, etc.) outlined in the engineering section, standard inner rings for drawn cup bearings are available. Inner rings for drawn cup bearings are designed to be a loose transition fit on the shaft and should be clamped against a shoulder. If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, the inner ring OD as mounted, must not exceed the raceway diameters required by the drawn cup bearing for the particular application.
