UC-PAN-204-12 3/4" -ID Tapped Base Pillow
3/4" -ID TAPPED BASE PILLOW BLOCK-FYHUCPAN20412 >
Recently Viewed
3/4" -ID TAPPED BASE PILLOW BLOCK-FYHUCPAN20412 >
Gates® Power Transmission Super HC® 5V1180 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 118 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
1-1/4" -ID HIGH PILLOW BLOCK UNIT-FYHUCP20720 >
5 mil (4.9 g) SensaTouch™ Gloves Powder Free Disposable Latex Industrial Food Service Grade Textured Finish 9.5 Inches Natural Component materials comply with all federal regulations for food contact Rubber latex, by its very nature, is a natural substance. The natural rubber latex polymer used to manufacture latex gloves is biodegradable, inherently antimicrobial, and antibacterial. The 5055 SensaTouch™ latex gloves are industrial food service grade and measure 5 mils thick. They have a textured finish and are powder-free. Are you looking for the best disposable latex gloves? Look no further than MCR Safety! *Note that natural rubber latex may cause allergic reactions in some people* Click here to view our other disposable glove options .
Browning® Classical Gripbelt® 1027598 AK Series Type 3 Single Groove Sheave, Finished Bore, 1-3/16 in Dia Bore, 12-1/4 in OD, 12.2 in (A)/11.66 in (3L) Dia Pitch, 3/4 in W Face
Browning® Classical Gripbelt® 1027598 AK Series Type 3 Single Groove Sheave, Finished Bore, 1-3/16 in Dia Bore, 12-1/4 in OD, 12.2 in (A)/11.66 in (3L) Dia Pitch, 3/4 in W Face
Anvil® 0310027404 FIG 1104 Street Elbow, 3/4 in Nominal, MNPT x FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
