Gates® Power Transmission Super HC® 5V1180 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 118 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
-
BrandGates® Power Transmission
-
UPC72053290776
-
Manufacturer Part Number5V1180
-
CountryUSA|Canada
-
Temperature Range-30 to 180 deg F
-
Thickness35/64 in
-
MaterialChloroprene
-
Top Width5/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter7.958 in
-
Section Size5V
-
Series9334
-
Number of Ribs1
-
Outside Length118 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
| Competitor Name | Cross-Reference Number |
|---|---|
| Motion Industries | 00725866 |
-
Alternative Part Number93341180
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Super HC® 5V1180 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 118 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
1-1/4" -ID HIGH PILLOW BLOCK UNIT-FYHUCP20720 >
5 mil (4.9 g) SensaTouch™ Gloves Powder Free Disposable Latex Industrial Food Service Grade Textured Finish 9.5 Inches Natural Component materials comply with all federal regulations for food contact Rubber latex, by its very nature, is a natural substance. The natural rubber latex polymer used to manufacture latex gloves is biodegradable, inherently antimicrobial, and antibacterial. The 5055 SensaTouch™ latex gloves are industrial food service grade and measure 5 mils thick. They have a textured finish and are powder-free. Are you looking for the best disposable latex gloves? Look no further than MCR Safety! *Note that natural rubber latex may cause allergic reactions in some people* Click here to view our other disposable glove options .
Browning® Classical Gripbelt® 1027598 AK Series Type 3 Single Groove Sheave, Finished Bore, 1-3/16 in Dia Bore, 12-1/4 in OD, 12.2 in (A)/11.66 in (3L) Dia Pitch, 3/4 in W Face
Browning® Classical Gripbelt® 1027598 AK Series Type 3 Single Groove Sheave, Finished Bore, 1-3/16 in Dia Bore, 12-1/4 in OD, 12.2 in (A)/11.66 in (3L) Dia Pitch, 3/4 in W Face
Anvil® 0310027404 FIG 1104 Street Elbow, 3/4 in Nominal, MNPT x FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Gates® Power Transmission PowerGrip® Twin Power® TP800H100 Heavy Timing Belt, 1 in W, 80 in OAL, 1/2 in Pitch, 160 Teeth, Neoprene
PowerGrip™ Twin Power™ Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronization from both driving surfaces. Due to its double and directly opposite teeth, Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates PowerGrip Twin Power belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.
