TL-STYLE BUSHING
1108-28-MM 28-mm-ID 1108-style Tl Bushing
28-MM-ID 1108-STYLE TL BUSHING - IDC110828MM>
1108-5/8 5/8"-ID 1108-style Taper-lock Bushing
5/8"-ID 1108-STYLE TAPER-LOCK BUSHING - IDC11085/8>
1108-7/8 7/8"-ID 1108-style Taper-lock Bushing
7/8"-ID 1108-STYLE TAPER-LOCK BUSHING - IDC11087/8 >
1108-9/16 9/16"-ID 1108-style Taper-lock Bushing
9/16"-ID 1108-STYLE TAPER-LOCK BUSHING - IDC11089/16>
1108-MPB Minimum Plain Bore Taper-lock Bushing
MINIMUM PLAIN BORE TAPER-LOCK BUSHING - IDC1108MPB >
1108X1-1/8 1-1/8" -ID 1108-style Taper-lock
1-1/8" -ID 1108-STYLE TAPER-LOCK BUSHING-BRW1108X11/8 >
1108X1.1/16 1-1/16" -ID 1108-style Taper-lock Bushing-brw1108x1.
1-1/16" -ID 1108-STYLE TAPER-LOCK BUSHING-BRW1108X1.1/16 >
1108X1/2 1/2" -ID 1108-style Taper-lock
1/2" -ID 1108-STYLE TAPER-LOCK BUSHING-BRW1108X1/2 >
1108X11/16 1-1/16" -ID 1108-style Taper-lock
1-1/16" -ID 1108-STYLE TAPER-LOCK BUSHING-BRW1108X11/16 >
1108X13/16 13/16" -ID 1108-style Taper-lock
13/16" -ID 1108-STYLE TAPER-LOCK BUSHING-BRW1108X13/16 >
1108X15/16 15/16" -ID 1108-style Taper-lock
15/16" -ID 1108-STYLE TAPER-LOCK BUSHING-BRW1108X15/16 >
1108X3/4 3/4" -ID 1108-style Taper-lock
Taper Lock Bushing - 1108 Series, 3/4 in Bore, 3/16 x 3/32 in Keyway
Mounts flush in products - No protruding flanges to interfere with the drive
Key to Key Drive - Capscrews act as an external key
1 1/2"/ft. Taper on Barrel - Since this is a non-self-locking taper it provides ease of installation and removal of products from the shaft.
1108X7/8 7/8" -ID 1108-style Taper-lock
7/8" -ID 1108-STYLE TAPER-LOCK BUSHING-BRW1108X7/8 >
1108X9/16 9/16" -ID 1108-style Taper-lock
9/16" -ID 1108-STYLE TAPER-LOCK BUSHING-BRW1108X9/16 >
1210-1.1/16 1-1/16"-ID 1210-style Taper-lock Bushing - Idc12101.
1-1/16"-ID 1210-STYLE TAPER-LOCK BUSHING - IDC12101.1/16>
1210-1.3/16 1-3/16"-ID 1210-style Taper-lock Bushing - Idc12101.
1-3/16"-ID 1210-STYLE TAPER-LOCK BUSHING - IDC12101.3/16 >
1210-1/2 1/2"-ID 1210-style Taper-lock Bushing
1/2"-ID 1210-STYLE TAPER-LOCK BUSHING - IDC12101/2>
1210-11/16 11/16"-ID 1210-style Taper-lock Bushing
11/16"-ID 1210-STYLE TAPER-LOCK BUSHING - IDC121011/16>
1210-13/16 13/16"-ID 1210-style Taper-lock Bushing
13/16"-ID 1210-STYLE TAPER-LOCK BUSHING - IDC121013/16>
1210-14-MM 14-mm-ID 1210-style Taper-lock Bushing
14-MM-ID 1210-STYLE TAPER-LOCK BUSHING - IDC121014MM>
1210-15/16 15/16"-ID 1210-style Taper-lock Bushing
15/16"-ID 1210-STYLE TAPER-LOCK BUSHING - IDC121015/16>
1210-16-MM 16-mm-ID 1210-style Taper-lock Bushing
16-MM-ID 1210-STYLE TAPER-LOCK BUSHING - IDC121016MM>
Recently Viewed
Drillco 750A120 Spade Drill, 5/16 in Drill - Fraction, 0.3125 in Drill - Decimal Inch, 2XD D Cutting, Solid Carbide
Solid Carbide spade drills perform well in hard to machine materials (up to Rc 60), high strength alloys, plastic, and glass. They can be used in thin sheet metal and spotting applications. Drilling depth should not exceed 2x the drill diameter.
Gates® Power Transmission Hi-Power® II B253 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 254 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Browning® 767415 VS 200 Standard-Duty Straight Bore Ball Bearing Insert, 1-11/16 in Dia Bore, 3.3465 in OD, 1-15/16 in W, 7901 lb Dynamic/5139 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Sealmaster® gold ER bearings feature a cylindrical OD and snap ring for easy installation in a roll assembly. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
The NIBCO 817012 (often cross-referenced under its Chemtrol brand name or universal part number 817-012) is a 1-1/4 inch Schedule 80 PVC 45-Degree Socket Elbow. It is a heavy-duty industrial pipe fitting used to change the flow direction of a piping system by a 45-degree angle.
Browning® 1297233 Single Strand Idler Sprocket With Hardened Teeth, 1/2 in Dia Bore, 1-3/4 in OD, 35 Chain, 13 Teeth, 3/8 in Pitch, Steel
Browning® 1297233 Single Strand Idler Sprocket With Hardened Teeth, 1/2 in Dia Bore, 1-3/4 in OD, 35 Chain, 13 Teeth, 3/8 in Pitch, Steel
