TL-STYLE BUSHING
28-MM-ID 1108-STYLE TL BUSHING - IDC110828MM>
1108-5/8 5/8"-ID 1108-style Taper-lock Bushing
5/8"-ID 1108-STYLE TAPER-LOCK BUSHING - IDC11085/8>
7/8"-ID 1108-STYLE TAPER-LOCK BUSHING - IDC11087/8 >
1108-9/16 9/16"-ID 1108-style Taper-lock Bushing
9/16"-ID 1108-STYLE TAPER-LOCK BUSHING - IDC11089/16>
MINIMUM PLAIN BORE TAPER-LOCK BUSHING - IDC1108MPB >
1-1/8" -ID 1108-STYLE TAPER-LOCK BUSHING-BRW1108X11/8 >
1-1/16" -ID 1108-STYLE TAPER-LOCK BUSHING-BRW1108X1.1/16 >
1/2" -ID 1108-STYLE TAPER-LOCK BUSHING-BRW1108X1/2 >
1-1/16" -ID 1108-STYLE TAPER-LOCK BUSHING-BRW1108X11/16 >
13/16" -ID 1108-STYLE TAPER-LOCK BUSHING-BRW1108X13/16 >
15/16" -ID 1108-STYLE TAPER-LOCK BUSHING-BRW1108X15/16 >
1108X3/4 3/4" -ID 1108-style Taper-lock
Taper Lock Bushing - 1108 Series, 3/4 in Bore, 3/16 x 3/32 in Keyway
Mounts flush in products - No protruding flanges to interfere with the drive
Key to Key Drive - Capscrews act as an external key
1 1/2"/ft. Taper on Barrel - Since this is a non-self-locking taper it provides ease of installation and removal of products from the shaft.
7/8" -ID 1108-STYLE TAPER-LOCK BUSHING-BRW1108X7/8 >
9/16" -ID 1108-STYLE TAPER-LOCK BUSHING-BRW1108X9/16 >
TL BUSHINGS-DOD117084>
TL BUSHINGS-DOD1210X7/8>
1210-1.1/16 1-1/16"-ID 1210-style Taper-lock Bushing - Idc12101.
1-1/16"-ID 1210-STYLE TAPER-LOCK BUSHING - IDC12101.1/16>
1-3/16"-ID 1210-STYLE TAPER-LOCK BUSHING - IDC12101.3/16 >
1210-1/2 1/2"-ID 1210-style Taper-lock Bushing
1/2"-ID 1210-STYLE TAPER-LOCK BUSHING - IDC12101/2>
1210-11/16 11/16"-ID 1210-style Taper-lock Bushing
11/16"-ID 1210-STYLE TAPER-LOCK BUSHING - IDC121011/16>
1210-13/16 13/16"-ID 1210-style Taper-lock Bushing
13/16"-ID 1210-STYLE TAPER-LOCK BUSHING - IDC121013/16>
14-MM-ID 1210-STYLE TAPER-LOCK BUSHING - IDC121014MM>
1210-15/16 15/16"-ID 1210-style Taper-lock Bushing
15/16"-ID 1210-STYLE TAPER-LOCK BUSHING - IDC121015/16>
16-MM-ID 1210-STYLE TAPER-LOCK BUSHING - IDC121016MM>
Recently Viewed
Gates® Power Transmission Poly Chain® GT®2 8MX-34S-36 Synchronous Sprocket, 1/2 to 1-11/16 in Taper-Lock® Bore, 3.346 in OD, 34 Grooves, 3.409 in Dia Pitch, 1.86 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
3-3/16"-ID 3535-STYLE TAPER-LOCK BUSHING - IDC3535X33/16 >
METRIC V-BELT 3250MM-JASSPB3250 >
Gates® Power Transmission Poly Chain® GT®2 8MX-33S-21 Synchronous Sprocket, 1/2 to 1-11/16 in Taper-Lock® Bore, 3.245 in OD, 33 Grooves, 3.308 in Dia Pitch, 1.2 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
Browning® Classical Gripbelt® 1028844 BK Series Type 3 Single Groove Sheave, Finished Bore, 5/8 in Dia Bore, 6.45 in OD, 5.9 in (A)/6.4 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1028844 BK Series Type 3 Single Groove Sheave, Finished Bore, 5/8 in Dia Bore, 6.45 in OD, 5.9 in (A)/6.4 in (B) Dia Pitch, 7/8 in W Face
Crescent® ALN13218 Standard Length Socket, 3/4 in, 1-7/8 in, 12 Points
