S-1-2-15/16 S1-2-15/16" Split Taper Bushing, 2-15/16" Bore, 3/4" X 3/8"
S1-2-15/16" SPLIT TAPER BUSHING, 2-15/16" BORE, 3/4" X 3/8" KEYWAY-BRWS1215/16 >
Recently Viewed
S1-2-15/16" SPLIT TAPER BUSHING, 2-15/16" BORE, 3/4" X 3/8" KEYWAY-BRWS1215/16 >
Browning® 1079698 Split Taper Bushing With Keyway, 25 mm Dia Bore, 2.7657 in Small End/2.875 in Large End Dia Barrel, 4-1/8 in Dia Flange, 63.5 mm OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
Browning® 1073477 QD Bushing, 2-5/8 in Dia Bore, 3-13/16 in Dia Barrel, 6 in Dia Flange, 2.64 in OAL, Ductile Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Sealmaster® 704056 FB Series Non-Expansion Standard-Duty Round/Straight Bore Ball Bearing Unit, 3/4 in Dia Bore, 1-1/2 in L Bolt Center-to-Center, 3-Bolt Flange Mount, 2-3/8 in OAL/Dia
Sealmaster® gold mounted ball bearings feature wide outer race insert bearing with a land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system. This provides a direct path for lubrication into the bearing. It also helps prevent outer ring rotation. Available with either setscrew or Skwezloc®concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex®HP grease loss and friction.
1" -14" TAPER TAP-PDTEK5016144T >
TRAKROL® bearings feature black oxide treated bearing steel. They utilize either a precision ball or tapered roller bearing insert for longer operating life under combination radial and thrust loads. The capacity for combination loads allows the TRAKROL® bearing to be available in plain (cylindrical), V-groove and flanged outside diameter in both stud and yoke styles. Small sizes less than 3 in outside diameter or point diameter use sealed ball bearing inserts. They also use a NYLAPLATE® seal for additional protection. Stud type configurations utilize a metal end plug seal on the roller face providing a long lasting seal. Both bearing types provide a large internal grease reservoir along with special sealing. This makes TRAKROL® bearings an excellent choice where reduced maintenance is required.
