2-5/8"-ID R-2-STYLE BUSHINGS IDC R-2-2-15/16
2-15/16"-ID R-2-STYLE BUSHING
Recently Viewed
2-5/8"-ID R-2-STYLE BUSHINGS IDC R-2-2-15/16
2-15/16"-ID R-2-STYLE BUSHING
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
WATTS® 0555224 LFB6780M1 2-Piece Diverter Ball Valve, 2 in Nominal, FNPT End Style, Bronze Body, Full Port, PTFE Softgoods
This 2 inch lead free two-piece full port diverter ball valve with threaded end connections is used in commercial and industrial applications designed to divert a full range of liquids and gases. The full port orifice ensures minimal pressure drop, while PTFE seat and chrome plated lead free brass ball provide lasting service. The temperature range is 0 to 350 degrees F (minus 18 to 177 degrees C) at 50 psi (3.5 bar). The maximum working pressure is 400 psi (28 bar) WOG non-shock at 100 degrees F (38 degrees C), 125 psi (8.6 bar) WSP.
5-GRV BANDED 5-V-1600 V-BELT-JAS5R5V1600 >
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
Crown® by Aervoe® 6075 Dry Film Lubricant, 16 oz Aerosol Can, Light Milky, 0.7
An industrial strength dry PTFE lubricant that is ideal whenever silicone products are not accessible and higher temperatures or pressure performance is required.
