VARIABLE SPEED BELTS
VARIABLE SPEED COGGED V-BELT FOR DRIVE APPLICATIONS WITH A SPEED CHANGE REQUIREMENT. 35.3" OUTSIDE CIRCUMFERENCE, SINGLE RIBS, VS BELT SECTION
VARIABLE SPEED BELT, 30 DEGREE ANGLE SERIES, 34-1/2" PITCH LENGTH; 1-5/8" WIDTH; 35.3" OUTSIDE LENGTH, KEVLAR TENSILE MATERIAL
-JAS2630V345 >
PIX SPB-2500 STANDARD V-BELT; SECTI0N SPB, 2500.00 MM OUTSIDE LENGTH 17.00 MM BELT WIDTH, 1 RIB
THESE BELTS ARE USED PRIMARILY ON ALL NEW DRIVES BECAUSE OF SPACE SAVINGS ACHIEVED BY USING THESE BELTS. THEIR USE IS IN ALL INDUSTRIAL APPLICATIONS FROM LIGHT DUTY DRIVES AS THOSE FOR PUMPS TO HEAVILY LOADED STONE CRUSHER DRIVES. IN WEDGE BELT DRIVES, BANDED BELTS CAN BE REPLACED BY SINGLE BELTS WITHOUT CHANGING THE PULLY CONFIGURATION. OIL RESISTANT, ANTISTATIC .
-PIXSPB2500>
PIX 3830-V-580 V-BELT, VARIABLE SPEED, 2-3/8" X 58"
VARIABLE SPEED BELTS FEATURE A RIGID TOP COVER THAT WITHSTANDS OIL AND HEAT. THEY ARE SUITABLE FOR HIGHER HORSEPOWER APPLICATIONS WITH WIDE SPEED RANGES OR HIGH HEAT EXPOSURES. THESE BELTS ARE OFTEN USED IN BAND SAW, MILLING MACHINES, AND CONVEYOR SYSTEMS THAT CAN SPEED UP AND SLOW DOWN
- PIX3830V580>
PIX 2530-V-595 VARIABLE SPEED BELT; 1-9/16" WIDE X 60.7 OUTSIDE LENGTH
30 DEGREE ANGLE SERIES; VARIABLE SPEED STYLE, 59-1/2" PITCH LENGTH; 1-9/16" WIDTH, 59-1/2" OUTSIDE LENGTH, POLYESTER TENSILE MATERIAL
-PIX2530V595 >
PIX 2530-V-575 VARIABLE SPEED BELT; 1-9/16" WIDE, 58.5" OUTSIDE LENGTH.
30 DEGREE ANGLE SERIES; VARIABLE SPEED STYLE, 57-1/2" PITCH LENGTH; 1-9/16" WIDTH, 58-1/2" OUTSIDE LENGTH, POLYESTER TENSILE MATERIAL
-PIX2530V575 >
PIX 2426-6V-343 1-1/2" X 35.1" VARIABLE SPEED POLYESTER BELT.
VARIABLE SPEED BELTS FEATURE A RIGID TOP COVER THAT WITHSTANDS OIL AND HEAT. THEY ARE SUITABLE FOR HIGHER HORSEPOWER APPLICATIONS WITH WIDE SPEED RANGES OR HIGH HEAT EXPOSURES. THESE BELTS ARE OFTEN USED IN BAND SAW, MILLING MACHINES, AND CONVEYOR SYSTEMS THAT CAN SPEED UP AND SLOW DOWN.
-PIX2426V343 >
PIX 2322-V-441 VARIABLE SPEED BELT; 44-3/4" OUTSIDE LENGTH, 1-7/16" TOP WIDTH, 22" GROOVE ANGLE
VARIABLE SPEED BELTS FEATURE A RIGID TOP COVER THAT WITHSTANDS OIL AND HEAT. THEY ARE SUITABLE FOR HIGHER HORSEPOWER APPLICATIONS WITH WIDE SPEED RANGES OR HIGH HEAT EXPOSURES. THESE BELTS ARE OFTEN USED IN BAND SAW, MILLING MACHINES, AND CONVEYOR SYSTEMS THAT CAN SPEED UP AND SLOW DOWN.
PIX2322V441 >
PIX 230-V-363 VARIABLE SPEED BELT, 37-1/4" OUTSIDE LENGTH, 1-3/4" TOP WIDTH, 30" GROOVE ANGLE
VARIABLE SPEED BELTS FEATURE A RIGID TOP COVER THAT WITHSTANDS OIL AND HEAT. THEY ARE SUITABLE FOR HIGHER HORSEPOWER APPLICATIONS WITH WIDE SPEED RANGES OR HIGH HEAT EXPOSURES. THESE BELTS ARE OFTEN USED IN BAND SAW, MILLING MACHINES, AND CONVEYOR SYSTEMS THAT CAN SPEED UP AND SLOW DOWN
-PIX2830V363 >
PIX 1922-V-426 MULTI SPEED BELT 1-3/16" X 43.4"
HIGH PERFORMANCE EFFICIENCY: ENGINEERED FOR MAXIMUM EFFICIENCY, THIS PRODUCT DELIVERS EXCEPTIONAL PERFORMANCE WITHOUT COMPROMISING ON QUALITY. IT'S A VERSATILE REPLACEMENT SUITABLE FOR VARIOUS APPLICATIONS
- PIX1922V426>
PIX 1922-V-338 MULTI-SPEED BELT- 1-3/16 " TOP WIDTH, 34.7" OVERALL LENGTH, 1-3/16" OVERALL HEIGHT, RUBBER
MULTI-SPEED BELT ADJUST TO THE PULLEY GROOVE WITH DIFFICULTY, PROVIDING A WIDE RANGE OF SPEEDS AND SPEED RATIOS
-PIX1922V338 >
PIX 1922-V-321 32.1" LENGTH X 1.19" WIDTH OFFROAD BELTS
THE BELTS EXCEED USA RMA PUBLISHED RATINGS LEVELS. THEY ARE DESIGNED TO PERFORM AT THE IDENTICAL OR HIGHER LEVEL THAN ALL OTHER MAJOR USA MANUFACTURER'S BELTS OF THE SAME TYPE.
-PIX1922V321>
PIX 1626-V-293 I26 DEGREE ANGLE, VARIABLE SPEED; 29.3" PITCH LENGTH; 1" BELT WIDTH; 30" OUTSIDE LENGTH; POLYESTER TENSILE MATERIAL; FABRIC OUTER MATERIAL
COGGED BELT TYPE, 1" BELT WIDTH, EPDM BELT MATERIAL, OIL-RESISTANT
PIX1626V293>
JASON 690J8 8-RIB POLY-V V-BELT. 3/32" PITCH; 69" BELT PITCH LENGTH; 3/4" BELT WIDTH
POLYESTER TENSILE MATERIAL; RUBBER OUTER MAT; 8 BANDS
-JAS690J8 >
JASON 690-J-12 12 RIB POLY-V V-BELTS, METERIC ANSI POLY-V BELT, J TOOTH PROFILE, 12 RIBS, 69 " LONG, 0.092 " PITCH
POLYESTER TENSILE MATERIAL; RUBBER OUTER MATERIAL MULTI-RIB V-BELT
12-RIB POLY-V V-BELTS -JAS690J12 >
JASON 2322V521 22 V CROSS SECTION VARIABLE SPEED BELT. 0.359 " CROSS SECTION WIDTH, 52.1 " PITCH LENGTH
VARIABLE SPEED BELT MADE OF CHLOROPRENE MATERIAL. FOR USE ON VARIABLE SPEED SHEAVE DRIVE REQUIRING EXACT SPEED CONTROL AND MAXIMUM RANGE OF SPEED CHANGES.
-JAS2322V521 >
JASON 2-R-B-115 B SECTION NATURAL RUBBER BANDED V-BELTS, 21/32" TOP WIDTH, 13/32" THICK, 115" INSIDE LENGTH 2 RIBS
CONSISTENT PERFORMANCE IN MULTIPLE V-BELT DRIVES-ENSURE ALL BELTS WILL MEASURE WITHIN ARPM MATCHING STANDARDS. BANDED CONSTRUCTION-FABRIC/NEOPRENE TOP BAND ENHANCES STABILITY AND PREVENT BELTS FROM TURNING OVER OR COMING OFF THE DRIVE. OIL & HEAT RESISTANT
-JAS2RB115 >
JASON 1922V277 MULTISPEED, BANDLESS, 1.1875 X 28.2 "G 27.7 PITCH
VARIABLE SPEED COGGED V-BELT FOR DRIVE APPLICATIONS WITH A SPEED CHANGE REQUIREMENT-
JAS1922V277>
JASON 450-J-8 8-RIB POLY-V V-BELT, 3/32" PITCH; 45" BELT PITCH LENGTH; 3/4" BELT WIDTH
POLYESTER TENSILE MATERIAL; RUBBER OUTER MATERIAL MULTI-RIB V-BELT
-JAS450J8 >
JASON 4430V790 VARIABLE SPEED BELT, V-BELT SECTION "V" OUTSIDE LENGTH 79" TOP WIDTH 2.75 "
CONFORMS TO RMA ENGINEERING STANDARD, TIME BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIMES NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH.
-JAS4430V790 >
Recently Viewed
Five (5) inches overall length with over 4-3/8" bolt clearance depth.
Features
1/2" Drive x 35mm Extra-Deep
Poly bag with barcode
Lifetime Warranty
M-490-6 APEX/COOPER TOOL PRODUCTS 1/4'' Hex Power Drive Bit Holder For 1/4'' Hex Insert Bits, Magnetic
1/4" -HEX BIT HOLDER, MAGNETIC, FOR 1/4" INSERTS-APXM4906 >
Poly bag with barcode
Lifetime Warranty
Well-thought-out design for ease of use
Made with attention to every detail for excellent results
Lightweight and durable construction for heavy use
Subject to numerous quality tests to eliminate any manufacturing defects
Product Details
1" Drive 40 mm 6-Point Deep Impact Socket (4040MD) by Grey Pneumatic®. Made from the highest grade material utilizing state-of-the-art manufacturing processes and equipment, this product will help you handle all your tasks easier and quicker. It delivers the perfect balance of strength and stiffness required for any of your high impact jobs.
10-32" X 3/4" B/H S/H CAPSCREWS-HOL65010>
The Grey Pneumatic 3/4" Drive x 3/4" Standard - 8 Point Socket (3524S) is a high-quality impact socket designed for heavy-duty applications. Its sturdy construction and durable materials make it a reliable choice for professionals and DIY enthusiasts alike.
KEY FEATURES AND BENEFITS:
Durable Construction: Made from heat-treated chrome-molybdenum steel for exceptional strength and longevity.
Secure Grip: 8-point design provides a secure grip on fasteners, reducing the risk of rounding off edges.
Enhanced Torque: Allows for up to 20% more torque compared to other impact sockets.
Improved Access: Thinner socket walls provide better access to tight spaces.
Easy Identification: Hard-stamped size markings for quick and easy reference.
Rust and Corrosion Resistance: Black oxide coating protects against the elements.
SPECIFICATIONS:
Drive: 3/4"
Size: 3/4"
Point: 8-point
Length: Standard
Material: Chrome-molybdenum steel
Heat-treated: Yes
Coating: Black oxide
GP® 1143E Extension, 3/8 in Drive, 3 in OAL
